Reg:software Version

Mohamed Kabeer S — Tue, 12 Mar 2019 04:31:49 GMT

Hi team,

In my office we have active and passive ASA 5540 with version 8.2(5).Now I plan to purchase anyconnect license. In the document, they clearly mentioned version 8.3 and above, we need to purchase one license passive will automatically sink.in my case I need to purchase two license. In my firewall have smartnet support, If I want upgrade the version 8.2(5) to 8.3.How I do this one? How I get the version? what is the to upload into my ASA?

Hi kabeer.ece07, If to have

rvarelac — Wed, 23 Jul 2014 16:52:52 GMT

Hi kabeer.ece07,

If to have a smartnet contract I recommend you to open a case with TAC.

Just go to cisco.com ---> support -- > open or view cases and open a new case , or call the customer service :

1 800 553 2447
1 408 526 7209

Anyway answering your question:

In order to upgrade your ASA you have to download the new version from Cisco.com

**Go to Cisco.com ---> support --- Downloads and search the version you need .

After that you need to transfer the software to the ASA , It could be done from a TFTP server or via ASDM.

Once you have the file into the ASA go to the config mode and type the following commands :

Boot system flash:name of the image

Write memory

Reboot

After reboot you can check the version with the "Show version" command

Also check this link:

http://www.techrepublic.com/blog/data-center/five-steps-to-upgrading-the-software-on-a-cisco-asa-5510/

Hope this help.

topic Reg:software Version in Network Security

Reg:software Version

Hi kabeer.ece07, If to have

1 800 553 24471 408 526 7209

1 800 553 2447
1 408 526 7209