IP address in ACL when migrate from FWSM 4.x to ASASM 9.1

zhiqiang.yan — Tue, 12 Mar 2019 04:25:34 GMT

hi,

I am migrating from FWSM to ASASM. A question about the ACL migration. On my FWSM, I use the natted IP as destination in ACL. I know we will use the real IP on ASASM. But will the migration step can translate the whole ACL from natting IP to real IP in the new configure?

Thanks,

Ryan

Hi, Correct. ASASM should

johflore — Fri, 04 Jul 2014 23:01:51 GMT

Hi,

Correct. ASASM should migrate automatically configuration about ACLs if there is NAT about it is pretty much because version and not model.

You can refer to NAT configuration format in following links:

https://supportforums.cisco.com/document/132066/asa-nat-83-nat-operation-and-configuration-format-cli

https://supportforums.cisco.com/docs/DOC-9129

And here are Web-Based NAT Migration Tool to obtain the similar results about NAT upgrade:

http://www.packetbin.com/scripts/ciscoPix84NATGenerator/

http://www.tunnelsup.com/tup/2013/05/18/nat-converter/

Johan.

topic IP address in ACL when migrate from FWSM 4.x to ASASM 9.1 in Network Security

IP address in ACL when migrate from FWSM 4.x to ASASM 9.1

Hi, Correct. ASASM should