Routing Question with Cisco ASA 5505 with 2 "Active" WAN Connections

todlee — Tue, 12 Mar 2019 04:22:22 GMT

We currently have a Cisco ASA 5505 Security Plus. I am looking to bring in a seperate circuit to handle our SIP trunks. I am not talking about an active/standby or failover setup. Can I achieve this with a simple route statement? Here is some backgound...

Interfaces:

Inside (VLAN1) 192.168.1.1 (security = 100)
Outside (VLAN2) 50.50.50.2 (security = 0)
VoIP (VLAN3) 60.60.60.2 (security = 50)

Can I just add the 2nd route statement to redirect all traffic for my SIP provider's switch which is located at 99.99.99.99?

route outside 0.0.0.0 0.0.0.0 50.50.50.1 1
route voip 99.99.99.99 255.255.255.255 60.60.60.1 1

I suspect the answer is yes and that I possibly just trying to overthink this issue.

Thanks,
Todd -

Hi , Yes this possible , to

SANTHOSHKUMAR SARAVANAN — Tue, 24 Jun 2014 01:27:25 GMT

Hi ,

Yes this possible , to route specific traffic via gateway . Ensure inspect sip is enabled on global policy for your SIP traffic .

HTH

Sandy

Yes, it does.Thanks!!Todd -

todlee — Tue, 24 Jun 2014 15:38:50 GMT

Yes, it does.

Thanks!!
Todd -

topic Routing Question with Cisco ASA 5505 with 2 "Active" WAN Connections in Network Security

Routing Question with Cisco ASA 5505 with 2 "Active" WAN Connections

Hi , Yes this possible , to

Yes, it does.Thanks!!Todd -