ASA5512 IPS Setup

kbillingham — Tue, 12 Mar 2019 04:18:00 GMT

Hello,

I configured an ASA5512 with the integrated IPS software module. I am having issues connecting to the software module. The IPS software module is running and I have configured it for the same subnet as my inside interface. When I click on the IPS button within ASDM it prompts me for login and has the correct IP address info. However, after attempting to login with verified credentials it errors out the the following: "Error connecting to sensor. Error Loading Sensor."

I have verified settings multiple times. Is there something I'm missing? Do I need ACL's created? My firewall is running in transparent mode.

Thanks in advance.

It's the full procedure you

syed kazim abbas — Sun, 15 Jun 2014 12:43:16 GMT

It's the full procedure you have to adopt. mean you should use cli first then go to ASDM.

http://www.cisco.com/c/en/us/products/collateral/security/ips-4200-series-sensors/guide_c07-464689.html

Regards,

kazim

topic ASA5512 IPS Setup in Network Security

ASA5512 IPS Setup

It's the full procedure you