ASA IPv6 Static Command Equivalent

jmunoz19 — Tue, 12 Mar 2019 04:12:56 GMT

Hi guys,

I am implementing IPv6 on a lab environment. My ASA is running 8.2(5). I am mapping the outside IP address 66.181.12.242 to 192.168.22.101 with the following command:

static (inside,outside) 66.181.12.242 192.168.22.101 netmask 255.255.255.255

I have given the inside host an IPv6 address of ABCD:192:168:22::101. I want the ASA to translate ABCD:66:181:12::242 to the internal ABCD:192:168:22::101. What is the equivalent command to do this in IPv6?

FYI, this is just a lab environment so the outside IP address isn't actually on the Internet. For the purposes of this lab I need to translate IPv6.

Thanks!

Jeff

NAT for ipv6 in 8.2(5) is NOT

manish arora — Mon, 19 May 2014 23:07:11 GMT

NAT for ipv6 in 8.2(5) is NOT SUPPORTED. You will have to upgrade your device to version 9.0 & up for ipv6-supported NAT commands.

Here's the link for more information :

http://www.cisco.com/c/en/us/td/docs/security/asa/asa90/release/notes/asarn90.html#pgfId-684764

Look for New features under version 9.0(1) - NAT support for IPv6

Manish

topic ASA IPv6 Static Command Equivalent in Network Security

ASA IPv6 Static Command Equivalent

NAT for ipv6 in 8.2(5) is NOT