Help downgrading config from 8.3 to 8.2

rayamitchell — Tue, 12 Mar 2019 04:10:08 GMT

I have a client using an old 8.2 IOS version of an ASA and I need to convert some of our standard configurations to 8.2 so it will work with his device.

am unfamiliar with 8.2, so I am wondering if someone can give me the equivalent of the following 8.3 configuration in 8.2 format.

object-group network remote-networks
network-object 10.10.5.0 255.255.255.240
exit
object-group network local-networks
network-object 10.42.11.0 255.255.255.0
exit

access-list vpn-acl extended permit ip object-group local-networks object-group remote-networks

nat (inside,outside) source static local-networks local-networks destination static remote-networks remote-networks

Any help appreciated!

It looks like a partial

Marvin Rhoads — Wed, 07 May 2014 17:07:52 GMT

It looks like a partial config covering exemption of NAT for a site-site VPN. We would typically use something like:

access-list inside_nat0_outbound extended permit ip 10.10.5.0 255.255.255.240
10.42.11.0 255.255.255.0

nat (inside) 0 access-list inside_nat0_outbound

A more complete setup can be seen in this Cisco example for site-site VPN (based on ASA 8.0).

topic It looks like a partial in Network Security

Help downgrading config from 8.3 to 8.2

It looks like a partial