https://community.cisco.com/t5/network-security/asa-5506-blink-amber/m-p/3928233#M24389 <P>First place, remove the power lead from Router.</P> <P>Connect console cable, and insert the Power lead, post the output of the boot process to understand what is the issue?</P> Sun, 22 Sep 2019 23:47:59 GMT balaji.bandi 2019-09-22T23:47:59Z https://community.cisco.com/t5/network-security/asa-5506-blink-amber/m-p/3928223#M24387 <P>Out of the blue AsA 5506-x just shot down and stop working after 2 years in service with the blink status light in amber condition.</P> Sun, 22 Sep 2019 21:55:09 GMT https://community.cisco.com/t5/network-security/asa-5506-blink-amber/m-p/3928223#M24387 afrancis 2019-09-22T21:55:09Z https://community.cisco.com/t5/network-security/asa-5506-blink-amber/m-p/3928231#M24388 <P>Hi,</P><P>&nbsp;</P><P>You firewall could be affected the "clock signal component failure" issue.</P><P><A href="https://www.cisco.com/c/en/us/support/docs/field-notices/642/fn64228.html" target="_blank">https://www.cisco.com/c/en/us/support/docs/field-notices/642/fn64228.html</A></P><P>&nbsp;</P><P>Talk to Cisco Tac and have it replaced.</P><P>&nbsp;</P><P>Thanks</P><P>John</P> Sun, 22 Sep 2019 23:37:48 GMT https://community.cisco.com/t5/network-security/asa-5506-blink-amber/m-p/3928231#M24388 johnd2310 2019-09-22T23:37:48Z https://community.cisco.com/t5/network-security/asa-5506-blink-amber/m-p/3928233#M24389 <P>First place, remove the power lead from Router.</P> <P>Connect console cable, and insert the Power lead, post the output of the boot process to understand what is the issue?</P> Sun, 22 Sep 2019 23:47:59 GMT https://community.cisco.com/t5/network-security/asa-5506-blink-amber/m-p/3928233#M24389 balaji.bandi 2019-09-22T23:47:59Z