topic SNMP Configuration on FMC in Network Security

SNMP Configuration on FMC

kostasthedelegate — Mon, 08 Jul 2019 11:49:49 GMT

Hello,

I would like to ask how could I configure SNMP in FMC for the firepower devices(2110).

As I searched there are 3 places with SNMP configurations.

1) System>Configuration (It is used for the FMC to be polled)

2) Devices>Platform Settings>Policy>SNMP (It is used for the devices to be polled)

3) Devices>Device Management>Inside a group of a device>SNMP (What is this for?)

My goal is to send statistics from a specific interface to the SNMP server. I have configured the 2) but the output of the info does not show anything for the interface.

Could you help clarify the different SNMP configs?

Regards,

Konstantinos

Re: SNMP Configuration on FMC

balaji.bandi — Mon, 08 Jul 2019 15:12:48 GMT

here is the SNMP configuration :

https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/213971-configure-snmp-on-firepower-ngfw-applian.html

Worth checking any log while poll take place from NMS Server to device in Analysys logs what is the errors ?

Re: SNMP Configuration on FMC

kostasthedelegate — Tue, 09 Jul 2019 11:18:59 GMT

Thank you BB,

It seems that the problem was on the server side.

It is working now.

Regards,

Konstantinos

Re: SNMP Configuration on FMC

balaji.bandi — Tue, 09 Jul 2019 15:59:10 GMT

if this resolved can you mark as resolved, so use full for other community users.