https://community.cisco.com/t5/network-security/multiple-netflow-destination-in-asa/m-p/3876478#M25586 This is the right way to configure multiple destination. (one class map is<BR />enough).<BR /><BR />access-list netflow-export extended permit ip any any<BR />!<BR />class-map netflow-export-class<BR /> match access-list netflow-export<BR />!<BR />policy-map global_policy<BR /> class netflow-export-class<BR /> flow-export event-type all destination 10.10.150.11 10.10.150.12<BR /> Thu, 20 Jun 2019 06:00:31 GMT Mohammed al Baqari 2019-06-20T06:00:31Z https://community.cisco.com/t5/network-security/multiple-netflow-destination-in-asa/m-p/3876116#M25585 <P>hi&nbsp;</P><P>I am trying to configure two netflow destinations on asa 8.2 but only one work&nbsp;</P><P>here is my configuration</P><P>&nbsp;access-list flow_export_acl extended permit ip any any</P><P>access-list flow_export_acl-2 extended permit ip any any<BR />flow-export destination xxxxxxx 10.30.1.45 2055</P><P>flow-export destination xxxxxxx 10.30.1.250 9996<BR />flow-export delay flow-create 30<BR />flow-export template timeout-rate 1<BR />class-map flow_export_class<BR />match access-list flow_export_acl<BR />policy-map global_policy</P><P>class-map flow_export_class-2<BR />match access-list flow_export_acl-2<BR />class flow_export_class<BR />flow-export event-type all destination 10.30.1.45</P><P>class flow_export_class-2<BR />flow-export event-type all destination 10.30.1.250<BR />service-policy flow_export_policy global</P><P>&nbsp;</P><P>after that only the 10.30.1.45 worked and the other one 10.30.1.250 did not work untill I removed&nbsp;class flow_export_class from the&nbsp;policy-map&nbsp;</P><P>so what is missing??????</P> Wed, 19 Jun 2019 15:00:06 GMT https://community.cisco.com/t5/network-security/multiple-netflow-destination-in-asa/m-p/3876116#M25585 treca201420141 2019-06-19T15:00:06Z https://community.cisco.com/t5/network-security/multiple-netflow-destination-in-asa/m-p/3876478#M25586 This is the right way to configure multiple destination. (one class map is<BR />enough).<BR /><BR />access-list netflow-export extended permit ip any any<BR />!<BR />class-map netflow-export-class<BR /> match access-list netflow-export<BR />!<BR />policy-map global_policy<BR /> class netflow-export-class<BR /> flow-export event-type all destination 10.10.150.11 10.10.150.12<BR /> Thu, 20 Jun 2019 06:00:31 GMT https://community.cisco.com/t5/network-security/multiple-netflow-destination-in-asa/m-p/3876478#M25586 Mohammed al Baqari 2019-06-20T06:00:31Z https://community.cisco.com/t5/network-security/multiple-netflow-destination-in-asa/m-p/3876613#M25587 <P>Dear Mohammed</P><P>many thanks for your help</P> Thu, 20 Jun 2019 09:21:09 GMT https://community.cisco.com/t5/network-security/multiple-netflow-destination-in-asa/m-p/3876613#M25587 treca201420141 2019-06-20T09:21:09Z