PIX_ASA Tunnel manager failed to establish an L2L SA

Adaa Tajuddin — Sun, 26 May 2019 20:02:43 GMT

Hi,

May I know what is means by this log --> PIX_ASA Tunnel manager failed to establish an L2L SA?

Re: PIX_ASA Tunnel manager failed to establish an L2L SA

balaji.bandi — Sun, 26 May 2019 21:15:24 GMT

%ASA-3-752015: Tunnel Manager has failed to establish an L2L SA.

Explanation

An attempt to bring up an L2L tunnel to a peer failed after trying with all configured protocols.

- mapTag—Name of the crypto map for which the initiation entry was removed
- mapSeq—Sequence number of the crypto map for which the initiation entry was removed

Recommended Action
Check the configuration, and make sure that the crypto maps are correctly configured. Debug the individual protocols to isolate the cause of the failure.

until we see the logs we are not in a postion to guide what was wrong. can be configure issue, make sure both the side config.

please post the config both the sides and soem debug logs

debug crypto condition peer y.y.y.y < - y is the other side of the peer ip

debug crypto ikev1

topic Re: PIX_ASA Tunnel manager failed to establish an L2L SA in Network Security

PIX_ASA Tunnel manager failed to establish an L2L SA

Re: PIX_ASA Tunnel manager failed to establish an L2L SA