https://community.cisco.com/t5/network-security/multiple-outside-interfaces-on-asa-5545/m-p/3855480#M26130 <P>Hi there!</P><P>&nbsp;</P><P>I need create two different tunnels IPSec on ASA 5545, I try to do this with ASA 5545 and Router 887.&nbsp;</P><P>&nbsp;</P><P>Can I do this with two interfaces in each device?&nbsp;</P><P>&nbsp;</P><P>Outside interface1-----Tunnel IPSec1----Router interface1</P><P>&nbsp;</P><P>Outiside interface 2----Tunnel IPSec2----Router interface 2</P><P>&nbsp;</P><P>&nbsp;</P><P>Regards!</P> Mon, 13 May 2019 21:25:07 GMT Zagam 2019-05-13T21:25:07Z https://community.cisco.com/t5/network-security/multiple-outside-interfaces-on-asa-5545/m-p/3855480#M26130 <P>Hi there!</P><P>&nbsp;</P><P>I need create two different tunnels IPSec on ASA 5545, I try to do this with ASA 5545 and Router 887.&nbsp;</P><P>&nbsp;</P><P>Can I do this with two interfaces in each device?&nbsp;</P><P>&nbsp;</P><P>Outside interface1-----Tunnel IPSec1----Router interface1</P><P>&nbsp;</P><P>Outiside interface 2----Tunnel IPSec2----Router interface 2</P><P>&nbsp;</P><P>&nbsp;</P><P>Regards!</P> Mon, 13 May 2019 21:25:07 GMT https://community.cisco.com/t5/network-security/multiple-outside-interfaces-on-asa-5545/m-p/3855480#M26130 Zagam 2019-05-13T21:25:07Z https://community.cisco.com/t5/network-security/multiple-outside-interfaces-on-asa-5545/m-p/3855486#M26131 <P>in short yes possible.</P> <P>&nbsp;</P> Mon, 13 May 2019 21:31:00 GMT https://community.cisco.com/t5/network-security/multiple-outside-interfaces-on-asa-5545/m-p/3855486#M26131 balaji.bandi 2019-05-13T21:31:00Z https://community.cisco.com/t5/network-security/multiple-outside-interfaces-on-asa-5545/m-p/3855568#M26132 <P>You will need to learn (or set static) routes so that each remote address uses the correct outgoing interface on both the ASA and the router.</P> Tue, 14 May 2019 02:52:47 GMT https://community.cisco.com/t5/network-security/multiple-outside-interfaces-on-asa-5545/m-p/3855568#M26132 Marvin Rhoads 2019-05-14T02:52:47Z