topic do i need to remove all the in Network Security

Cisco ASA 5510 Regular static Nat is not working

ahcimran1 — Tue, 12 Mar 2019 03:59:19 GMT

We have Cisco ASA 5510 Firewall

Having 4 public ips in which 3 are working without any issues.

The 4th public ip previously working but suddenly it stoped.

it will work only if i connect the cable to LAN and Manually assign the Public IP.

My ASA Regular Static Nat configuration:

access-list 101 extended permit ip any host X.X.X.X
static (inside,outside) X.X.X.X 10.10.3.7 netmask 255.255.255.255

Hi,If configuration as same

Sajid Ali — Tue, 25 Mar 2014 09:36:23 GMT

Hi,

If configuration as same as ealier when every thing was working fine and no other configuration changes are made on firewall during that time period, thats mean to issue with configuration. Just do reconfigure specific part of configuration that you mentioned above, I hope it will work.

Don't forget to rate helpfull posts.

Sajid Ali Pathan

The other public ips are

ahcimran1 — Tue, 25 Mar 2014 11:12:20 GMT

The other public ips are working with the same configuration.

But only one ip having issues

Hi,I got you reply on email

Sajid Ali — Tue, 25 Mar 2014 11:19:34 GMT

Hi,

I got you reply on email but not on support forum, I don’t know what bug is this with cisco community. Leave it, come to the point:

I understand you next question, you have to do as i said, Just reconfigure static net for problematic IP.

Don't forget to rate helpfull posts.

Sajid Ali Pathan

yes i tried so many times but

ahcimran1 — Tue, 25 Mar 2014 13:29:53 GMT

yes i tried so many times but still nothing.

do i need to remove all the

ahcimran1 — Thu, 27 Mar 2014 12:49:12 GMT

do i need to remove all the access-list configuration?

i means remove all and reconfig it again .. Will work?

Please reply