topic Re: Failed to create certificate enrollment on FMC in Network Security

Failed to create certificate enrollment on FMC

susana.silva@compta.pt — Fri, 28 Jun 2019 14:12:47 GMT

Hello, I am configuring a FTD on the FMC and used the conversion tool to migrate the configs from an ASA. Everything seems ok except for the VPNs configuration that was not migrated so we had to configure it from scratch on the FMC. I am following the documentation to do this but when I create the enrollment for the certificates (and I tried all types) always get the error "Please retry the operation, if the problem persists please contact Cisco Technical services". If I deploy the config get the error "trust point not enrolled"

can someone help me on this?

Really appreciate it.

Nuno

Re: Failed to create certificate enrollment on FMC

Rob Ingram — Fri, 28 Jun 2019 15:25:10 GMT

Hi,

Read this guide, as it covers the steps to create the certificate request and import/enrollment procedure for Firepower certificates for VPN authentication. If you have any further issue after following this guide, please provide further information.

HTH

Re: Failed to create certificate enrollment on FMC

susana.silva@compta.pt — Fri, 28 Jun 2019 16:16:16 GMT

Hi, did you forgot the link?
tks

Re: Failed to create certificate enrollment on FMC

Rob Ingram — Fri, 28 Jun 2019 16:19:53 GMT

No, there is a hyperlink under the word this on the original post. Here it is again....

https://integratingit.wordpress.com/2018/11/10/ftd-vpn-with-certificates/