https://community.cisco.com/t5/network-security/asa-eigrp-port-channel-bug/m-p/2376000#M270769 <P>Hi All</P><P></P><P>I have EIGRP configured on an ASA5512-X code version 9.1(4). When I do a "show eigrp interfaces" the Port Channel linking to the adjacent router is not listed. It is not a passive interface (even did a "no passive-interface outside" to double check). Other interfaces are listed. Debugging EIGRP shows no hellos arriving on that interface either, even though a debug on the adjacent router confirms they are being sent. Am I missing something or is this a bug?</P><P></P><P>Thanks for looking!</P><P></P><P>- James</P> Tue, 12 Mar 2019 03:37:02 GMT noisey_uk 2019-03-12T03:37:02Z https://community.cisco.com/t5/network-security/asa-eigrp-port-channel-bug/m-p/2376000#M270769 <P>Hi All</P><P></P><P>I have EIGRP configured on an ASA5512-X code version 9.1(4). When I do a "show eigrp interfaces" the Port Channel linking to the adjacent router is not listed. It is not a passive interface (even did a "no passive-interface outside" to double check). Other interfaces are listed. Debugging EIGRP shows no hellos arriving on that interface either, even though a debug on the adjacent router confirms they are being sent. Am I missing something or is this a bug?</P><P></P><P>Thanks for looking!</P><P></P><P>- James</P> Tue, 12 Mar 2019 03:37:02 GMT https://community.cisco.com/t5/network-security/asa-eigrp-port-channel-bug/m-p/2376000#M270769 noisey_uk 2019-03-12T03:37:02Z https://community.cisco.com/t5/network-security/asa-eigrp-port-channel-bug/m-p/2376001#M270771 <P>Just ran into the same problem exactly and was so glad to find this post.</P> <P></P> <P>Did you end up with a&nbsp;fix?</P> Tue, 07 Mar 2017 22:04:27 GMT https://community.cisco.com/t5/network-security/asa-eigrp-port-channel-bug/m-p/2376001#M270771 Steve King 2017-03-07T22:04:27Z