topic Re: Deployment has failed FDM in Network Security

Deployment has failed FDM

Ionela.Onceru — Sat, 22 Jun 2019 14:11:10 GMT

Hello,

I am facing some problems when try to I deploy from FDM. Until couple days it worked well, but now everytime I receive this error " Deployment has failed. Deployment failed for an unknown reason. Please try deploying changes again. If the problem persists, reboot the device and try again. If you continue to have problems, contact Technical Support." .

Can you help me please? I have a presentation after two days, and now I ruined everything.

Re: Deployment has failed FDM

KarimOUATTARA0210 — Sun, 23 Jun 2019 01:02:19 GMT

Hello,

What version are you running ?
can you tipe below comands and see if disk0 is mounted on read-only ?

> expert
$sudo su
# mount

Regards,
Zanga

Re: Deployment has failed FDM

Marvin Rhoads — Sun, 23 Jun 2019 10:41:17 GMT

I had a similar issue a couple of months back and the TAC ended up directing me to reimage the device (an ASA 5506).

Since I did that, everything has been working fine.

Re: Deployment has failed FDM

Ionela.Onceru — Sun, 23 Jun 2019 10:54:34 GMT

NGFW version is 6.2.3. In the photo attached is the result of running the mount command.

Re: Deployment has failed FDM

shurufade — Sat, 04 Jun 2022 17:50:03 GMT

Well, this whole FTD process is a uncomfortable.

Problems and suggestions

1. upon issuing this command "configure manager add" it deletes the whole config

Sug: FTD should still be accessible through https and not delete the config when added to FMC Similar to how Palo Alto is managed through panorama

2. deploying a config takes ages to deploy unlike ASA which is quicker and simpler

Sug: this is bit quicker under FMC

3. no fix for your above issue until now "Deployment has failed FDM" unless you reboot both FTDs

Sug : reboot or use lates hot fix 7.1xx -28

4. CLI is not as simple as ASA .. FlexiConfig is not as simple or rich as ASA Cli

Sug: simplify CLI config similar to ASA

I think cisco developers need to fix/review their coding