copy configuration snippet to the running-config fail

Steven1978 — Mon, 29 Apr 2019 15:22:49 GMT

Hello community,

i want to copy some commands from a textfile that was uploaded to an ASA to the running-config. But the commandline tells me that there is a "dot" at the first line at the textfile. If i create a empty first row, the error appears, if i put a valid commend to the first line the error appears, too.

Nothing special at the file, only a textfile with a network objects group and hosts and networks.

Here is an example of the file that have to be copied to the running-config

object-group network GLOBAL-GRP-NET_MS_O365-https
network-object 104.47.0.0 255.255.128.0
network-object 157.55.234.0 255.255.255.0
network-object 157.56.110.0 255.255.254.0

Result of the command: "copy /noconfirm disk0:/PortsTcp_443.txt running-config"



^
ERROR: % Invalid input detected at '^' marker.

The Textfile is utf-8 formatted. At Notepad++, there is no character visible.

ASA IOS is 9.1(7)32

Any hints or tipps? Thank you very much.

topic copy configuration snippet to the running-config fail in Network Security

copy configuration snippet to the running-config fail