topic basic cli configuration in asa 5512x in Network Security

basic cli configuration in asa 5512x

Rodante Evangelista — Tue, 12 Mar 2019 03:16:45 GMT

can you give me a basic cli configuration in asa 5512x and also how to install the licence

basic cli configuration in asa 5512x

Jouni Forss — Thu, 12 Dec 2013 09:23:54 GMT

Hi,

License installation information to my understanding is usually included in the information that Cisco sends you directly.

Usually its just inserting the activation-key that comes from Cisco.

As for the configuration you have not really given us any starting information about your setup.

- Jouni

basic cli configuration in asa 5512x

Rodante Evangelista — Tue, 07 Jan 2014 08:55:49 GMT

Hi jouniForss

this is my initial config of my asa5512x, can you tell me what is missing in my command that is important

interface GigabitEthernet0/0

nameif outside

security-level 0

ip address 192.168.8.155 255.255.255.0

interface GigabitEthernet0/1

nameif inside

security-level 100

ip address 10.14.11.254 255.255.255.0

interface GigabitEthernet0/2

shutdown

no nameif

no security-level

no ip address

interface GigabitEthernet0/3

shutdown

no nameif

no security-level

no ip address

interface GigabitEthernet0/4

shutdown

no nameif

no security-level

no ip address

interface GigabitEthernet0/5

shutdown

no nameif

no security-level

no ip address

interface Management0/0

nameif management

security-level 100

ip address 192.168.1.1 255.255.255.0

management-only

boot system disk0:/asa861-2-smp-k8.bin

ftp mode passive

object network OBJ_GENERIC_ALL

subnet 0.0.0.0 0.0.0.0

pager lines 24

logging asdm informational

mtu management 1500

mtu inside 1500

mtu outside 1500

icmp unreachable rate-limit 1 burst-size 1

asdm image disk0:/asdm-66114.bin

no asdm history enable

arp timeout 14400

nat (inside,outside) source dynamic OBJ_GENERIC_ALL interface

route outside 0.0.0.0 0.0.0.0 192.168.8.254 1

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00

timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00

timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

timeout floating-conn 0:00:00

dynamic-access-policy-record DfltAccessPolicy

user-identity default-domain LOCAL

http server enable

http 192.168.1.0 255.255.255.0 management

no snmp-server location

no snmp-server contact

snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart

telnet timeout 5

ssh timeout 5

console timeout 0

dhcpd address 192.168.1.2-192.168.1.254 management

dhcpd enable management

threat-detection basic-threat

threat-detection statistics access-list

no threat-detection statistics tcp-intercept

webvpn

I have this configurations

aparra0507 — Thu, 12 Jun 2014 22:12:18 GMT

I have this configurations but I can only do ping intra inside network. I need use other ports inside inside ?

ASA Version 9.1(2)
!
hostname ASAPyQGYESA
domain-name qroma.ec
enable password 8Ry2YjIyt7RRXU24 encrypted
names
!
interface GigabitEthernet0/0
description Wan Telconet
nameif outside
security-level 0
ip address 192.168.35.210 255.255.255.0
!
interface GigabitEthernet0/1
description LAN PyQ
nameif inside
security-level 100
ip address 192.168.150.1 255.255.254.0
!
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
management-only
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
!
boot system disk0:/asa912-smp-k8.bin
ftp mode passive
clock timezone ECT -5
dns server-group DefaultDNS
domain-name qroma.ec
same-security-traffic permit intra-interface
object network obj-insidehaciaTelco
subnet 0.0.0.0 0.0.0.0
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu management 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
asdm image disk0:/asdm-713.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source dynamic obj-insidehaciaTelco interface
route outside 0.0.0.0 0.0.0.0 192.168.35.1 1
route inside 192.168.8.0 255.255.248.0 192.168.150.2 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 192.168.150.46 255.255.255.255 inside
http 192.168.150.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd address 192.168.150.100-192.168.150.200 inside
dhcpd dns 192.168.150.3 interface inside
dhcpd domain qroma.ec interface inside
dhcpd update dns both interface inside
dhcpd enable inside
!
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
!
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1
username qromaecugye password UOQP23GTSN5C/jOA encrypted privilege 15
username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:8990fb900e041d488c30d1ddbe6a6c89
: end
ASAPyQGYESA#