topic Re: ASA 5505 - adding an Access Point in Network Security https://community.cisco.com/t5/network-security/asa-5505-adding-an-access-point/m-p/2388928#M309216 <HTML><HEAD></HEAD><BODY><P>The Cisco SMB-APs can use PoE. There are different models with 2.4 GHz, 5GHz, or even both. As the 5505 only has FE-ports, the 300 or even 500 models could be a little bit overkill. But the WAP561 is a quite good model with simultaneous 802.11abgn that still fits when you decide to attach the AP to dedicated switch at a later time.<BR /><BR /><BR />Sent from Cisco Technical Support iPad App</P></BODY></HTML> Sun, 10 Nov 2013 21:11:40 GMT Karsten Iwen 2013-11-10T21:11:40Z ASA 5505 - adding an Access Point https://community.cisco.com/t5/network-security/asa-5505-adding-an-access-point/m-p/2388927#M309215 <P>Hello,</P><P></P><P>I have just bought an ASA 5505 for my home.&nbsp; Currently I have just a WiFi router from the ISP (Virgin Broadband Fibre), but I aim to put this into modem mode and put onto the outside of the ASA.</P><P></P><P>Once I have done that I need to enable WiFi again, but I will need an access point of some sort I guess, can anyone recommend one and can the PoE ports be used for this?</P><P></P><P>I may use a VOIP phone in the other PoE port.</P><P></P><P>Thanks</P> Tue, 12 Mar 2019 03:03:00 GMT https://community.cisco.com/t5/network-security/asa-5505-adding-an-access-point/m-p/2388927#M309215 Andy White 2019-03-12T03:03:00Z Re: ASA 5505 - adding an Access Point https://community.cisco.com/t5/network-security/asa-5505-adding-an-access-point/m-p/2388928#M309216 <HTML><HEAD></HEAD><BODY><P>The Cisco SMB-APs can use PoE. There are different models with 2.4 GHz, 5GHz, or even both. As the 5505 only has FE-ports, the 300 or even 500 models could be a little bit overkill. But the WAP561 is a quite good model with simultaneous 802.11abgn that still fits when you decide to attach the AP to dedicated switch at a later time.<BR /><BR /><BR />Sent from Cisco Technical Support iPad App</P></BODY></HTML> Sun, 10 Nov 2013 21:11:40 GMT https://community.cisco.com/t5/network-security/asa-5505-adding-an-access-point/m-p/2388928#M309216 Karsten Iwen 2013-11-10T21:11:40Z