topic ASA 5512-X no int vlan command!? in Network Security https://community.cisco.com/t5/network-security/asa-5512-x-no-int-vlan-command/m-p/2298082#M344023 <HTML><HEAD></HEAD><BODY><P>"int vlan" is specific to the 5505 which has an integrated switch. The 5510 and higher use a subinterface and vlan command within the subinterface config mode. See the configuration guide section here:</P><P></P><P><A href="http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/interface_start.html#wp1082576">http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/interface_start.html#wp1082576</A></P><P></P><P><SPAN style="font-size: 10pt;">Rear panel ports are numbersed as described in the hardware installation guide here:</SPAN></P><P></P><P><A href="http://www.cisco.com/en/US/docs/security/asa/hw/maintenance/5500xguide/asa_overview.html#wp1069960">http://www.cisco.com/en/US/docs/security/asa/hw/maintenance/5500xguide/asa_overview.html#wp1069960</A></P><P></P><P>I don't have one in front of me but seem to recall they also have printed designations on the physical unit if you look closely.</P></BODY></HTML> Sat, 24 Aug 2013 03:30:39 GMT Marvin Rhoads 2013-08-24T03:30:39Z ASA 5512-X no int vlan command!? https://community.cisco.com/t5/network-security/asa-5512-x-no-int-vlan-command/m-p/2298081#M344021 <P>I don't have much experience yet with ASAs but I thought the int vlan command should be available? It's an ASA 5512-X with IOS 8.6(1)2, should I upgrade to the newest 9 version? Also, there are rj45 interfaces and SFP interfaces which are numbered Gi0/0 -5 and Gi1/0 - 5, how do I tell what numbers correspond to what interfaces?&nbsp; Thanks</P> Tue, 12 Mar 2019 02:30:22 GMT https://community.cisco.com/t5/network-security/asa-5512-x-no-int-vlan-command/m-p/2298081#M344021 Mark Mattix 2019-03-12T02:30:22Z ASA 5512-X no int vlan command!? https://community.cisco.com/t5/network-security/asa-5512-x-no-int-vlan-command/m-p/2298082#M344023 <HTML><HEAD></HEAD><BODY><P>"int vlan" is specific to the 5505 which has an integrated switch. The 5510 and higher use a subinterface and vlan command within the subinterface config mode. See the configuration guide section here:</P><P></P><P><A href="http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/interface_start.html#wp1082576">http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/interface_start.html#wp1082576</A></P><P></P><P><SPAN style="font-size: 10pt;">Rear panel ports are numbersed as described in the hardware installation guide here:</SPAN></P><P></P><P><A href="http://www.cisco.com/en/US/docs/security/asa/hw/maintenance/5500xguide/asa_overview.html#wp1069960">http://www.cisco.com/en/US/docs/security/asa/hw/maintenance/5500xguide/asa_overview.html#wp1069960</A></P><P></P><P>I don't have one in front of me but seem to recall they also have printed designations on the physical unit if you look closely.</P></BODY></HTML> Sat, 24 Aug 2013 03:30:39 GMT https://community.cisco.com/t5/network-security/asa-5512-x-no-int-vlan-command/m-p/2298082#M344023 Marvin Rhoads 2013-08-24T03:30:39Z