Cisco ISA 550 NAT problem

Charith Gamhewa — Tue, 12 Mar 2019 02:30:30 GMT

Hi all,

I have bought a Cisco ISA 550 small business firewall and I had to face to a problem when I configure the NAT.

My scenario is,

I have a mail server in my LAN which is need to be access from both inside and outside

My lan network is 192.168.0.0/24

I have a PPPoE WAN connection with a static IP

Mail server IP 192.168.0.15/ 24

There is not a DMZ zone. I need to NAT this server to my WAN IP and that WAN IP is also used

to provide internet connection to other LAN users. I could do this with my previous ADSL

router and i tried to do this with firewall but couldn't acheive the task.

Hope a help from some expert.

Thanks,

Charith

Michael Muenz — Mon, 26 Aug 2013 11:13:01 GMT

Do you want that your internal clients connect to the WAN IP and get natted to the local LAN IP?

Then open the Maintain and Operate Guide at cisco.com and search for "hairpinning".

Michael

Please rate all helpful posts

topic Cisco ISA 550 NAT problem in Network Security