topic Problem on port forwarding on ASA 5512x? in Network Security

Problem on port forwarding on ASA 5512x?

rechard_hk — Tue, 12 Mar 2019 02:29:18 GMT

Dear All,

I would like to ask you that currently i have two public ip add
and i would like to use port forwoarding. as below i use one public ip add
and other one i don't know how to configure.

Public ip add 203.10.1.1
----
access-list outside_acl_in extended permit tcp any host 192.168.1.2 eq www

object network www-10
nat (inside,outside) static interface service tcp www www

so i would like to add other public 203.10.1.2 to 192.168.1.3 port www

Best Regards,

rechard

Problem on port forwarding on ASA 5512x?

Julio Carvajal — Thu, 22 Aug 2013 03:46:36 GMT

Hello Rechard,

Same thing, just use the IP address instead of the "interface" keyword.

static (inside,outside) tcp 203.10.1.2 80 192.168.1.3 80

access-list outside_acl permit tcp any host 203.10.1.2 eq 80

Check my blog at http:laguiadelnetworking.com for further information.

Cheers,

Julio Carvajal Segura

Problem on port forwarding on ASA 5512x?

rechard_hk — Thu, 22 Aug 2013 04:48:49 GMT

Dear Juilo,

Is it working on ASA 5512 V.9.1.1?

Currently i'm using

object network www-10
host 192.168.1.2

access-list outside_acl_in extended permit tcp any host 192.168.1.2 eq www

object network www-10
nat (inside,outside) static interface service tcp www www

Best Regards,

Rechard

Problem on port forwarding on ASA 5512x?

vishaw jasrotia — Thu, 22 Aug 2013 05:39:39 GMT

Hey Rechard

Do this

object network www-10

host 192.168.1.3

nat (inside,outside) static 203.10.1.2 service tcp www www

Thanks

Vishaw

Problem on port forwarding on ASA 5512x?

Julio Carvajal — Thu, 22 Aug 2013 06:20:36 GMT

Hello,

You showed us the configuration on version 8.2 or lower but wanted on 8.3 or higher... lol.

OK, that being said

object network Inside_Server_2

host 192.168.1.3

Object network Outside_Server_2

host 203.10.1.2

nat (inside,outside) 1 source static Inside_Server_2 Outside_Server_2

access-list outside_acl_in permit tcp any host 192.168.1.3 eq 80

Remember to rate all of the answers

Check my blog at http:laguiadelnetworking.com and subscribe so you can get daily information about networking.

Cheers,

Julio Carvajal Segura