topic ASA Command change help in Network Security https://community.cisco.com/t5/network-security/asa-command-change-help/m-p/2279269#M345325 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>It depends on the current NAT configuration on the ASA running 7.2(4)</P><P></P><P>For example does it have any existing NAT0 configurations?</P><P></P><P>Also we dont know what networks those objects like <STRONG>"net-local"</STRONG> and <STRONG>"net-remote"</STRONG> contain so its impossible to say the exact corresponding configuration.</P><P></P><P>The configuration format would be</P><P></P><P><STRONG>access-list INSIDE-NAT0 permit ip <LOCAL network=""> <NETWORK mask=""> <REMOTE network=""> <NETWORK mask=""></NETWORK></REMOTE></NETWORK></LOCAL></STRONG></P><P></P><P><STRONG>nat (inside) 0 access-list INSIDE-NAT0</STRONG></P><P></P><P>Please do remember to mark a reply as the correct answer if it answered your question.</P><P></P><P>Feel free to ask more if needed.</P><P></P><P>- Jouni</P></BODY></HTML> Thu, 01 Aug 2013 17:55:50 GMT Jouni Forss 2013-08-01T17:55:50Z ASA Command change help https://community.cisco.com/t5/network-security/asa-command-change-help/m-p/2279268#M345323 <P>HI guys,</P><P>Iam trying to configure VPN and need to change the following command to fit in image asa724-k8;</P><P></P><P>nat (inside,outside) 1 source static net-local destination static net-remote net-remote</P><P></P><P>This is an old command.</P><P>I need you help.</P><P>Thanks,</P> Tue, 12 Mar 2019 02:20:24 GMT https://community.cisco.com/t5/network-security/asa-command-change-help/m-p/2279268#M345323 Stephano Mwendo 2019-03-12T02:20:24Z ASA Command change help https://community.cisco.com/t5/network-security/asa-command-change-help/m-p/2279269#M345325 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>It depends on the current NAT configuration on the ASA running 7.2(4)</P><P></P><P>For example does it have any existing NAT0 configurations?</P><P></P><P>Also we dont know what networks those objects like <STRONG>"net-local"</STRONG> and <STRONG>"net-remote"</STRONG> contain so its impossible to say the exact corresponding configuration.</P><P></P><P>The configuration format would be</P><P></P><P><STRONG>access-list INSIDE-NAT0 permit ip <LOCAL network=""> <NETWORK mask=""> <REMOTE network=""> <NETWORK mask=""></NETWORK></REMOTE></NETWORK></LOCAL></STRONG></P><P></P><P><STRONG>nat (inside) 0 access-list INSIDE-NAT0</STRONG></P><P></P><P>Please do remember to mark a reply as the correct answer if it answered your question.</P><P></P><P>Feel free to ask more if needed.</P><P></P><P>- Jouni</P></BODY></HTML> Thu, 01 Aug 2013 17:55:50 GMT https://community.cisco.com/t5/network-security/asa-command-change-help/m-p/2279269#M345325 Jouni Forss 2013-08-01T17:55:50Z