https://community.cisco.com/t5/network-security/asa-upgrades-and-skipping-versions/m-p/2271530#M346021 <P>Hi,</P><P></P><P>Aside from all of the normal 8.2 to 8.3 (and above) upgrade issues/concerns that are completely documented elsewhere, I'm wondering if anyone has seen the same issues I have had upgrading ASAs from 8.2(x) to anything above 8.4(x)? </P><P></P><P>The problems below seemed to caused by <EM>skipping versions</EM> or at least I thought these particular issues were avoided when I did not skip upgrade versions</P><PRE __jive_macro_name="quote" class="jive_text_macro jive_macro_quote"><P>adding unidirectional nat </P><P>leaving off nat route lookup</P><P>adding nat (inside,any)&nbsp; </P></PRE><P></P><P>Is there a way to avoid these issues when skipping upgrade versions?</P><P></P><P>Appeciate your input. </P><P></P><P>Thanks.</P> Tue, 12 Mar 2019 02:15:30 GMT lcaruso 2019-03-12T02:15:30Z https://community.cisco.com/t5/network-security/asa-upgrades-and-skipping-versions/m-p/2271530#M346021 <P>Hi,</P><P></P><P>Aside from all of the normal 8.2 to 8.3 (and above) upgrade issues/concerns that are completely documented elsewhere, I'm wondering if anyone has seen the same issues I have had upgrading ASAs from 8.2(x) to anything above 8.4(x)? </P><P></P><P>The problems below seemed to caused by <EM>skipping versions</EM> or at least I thought these particular issues were avoided when I did not skip upgrade versions</P><PRE __jive_macro_name="quote" class="jive_text_macro jive_macro_quote"><P>adding unidirectional nat </P><P>leaving off nat route lookup</P><P>adding nat (inside,any)&nbsp; </P></PRE><P></P><P>Is there a way to avoid these issues when skipping upgrade versions?</P><P></P><P>Appeciate your input. </P><P></P><P>Thanks.</P> Tue, 12 Mar 2019 02:15:30 GMT https://community.cisco.com/t5/network-security/asa-upgrades-and-skipping-versions/m-p/2271530#M346021 lcaruso 2019-03-12T02:15:30Z