topic Show active TCP connections in ASA 5520 in Network Security https://community.cisco.com/t5/network-security/show-active-tcp-connections-in-asa-5520/m-p/2225825#M348548 <HTML><HEAD></HEAD><BODY><P> sh conn detail protocol tcp</P><P></P><P>Regards</P></BODY></HTML> Thu, 06 Jun 2013 17:19:23 GMT Julio Carvajal 2013-06-06T17:19:23Z Show active TCP connections in ASA 5520 https://community.cisco.com/t5/network-security/show-active-tcp-connections-in-asa-5520/m-p/2225824#M348547 <P>I'm trying to figure out how many active TCP sessions my ASA has but having a hard time finding this information.&nbsp; When I do "show conn count" from the CLI it shows what I'm guessing is a sum of both TCP and UDP.&nbsp; Is there any way to get just the TCP connections?</P> Tue, 12 Mar 2019 01:53:50 GMT https://community.cisco.com/t5/network-security/show-active-tcp-connections-in-asa-5520/m-p/2225824#M348547 bstockslager 2019-03-12T01:53:50Z Show active TCP connections in ASA 5520 https://community.cisco.com/t5/network-security/show-active-tcp-connections-in-asa-5520/m-p/2225825#M348548 <HTML><HEAD></HEAD><BODY><P> sh conn detail protocol tcp</P><P></P><P>Regards</P></BODY></HTML> Thu, 06 Jun 2013 17:19:23 GMT https://community.cisco.com/t5/network-security/show-active-tcp-connections-in-asa-5520/m-p/2225825#M348548 Julio Carvajal 2013-06-06T17:19:23Z Show active TCP connections in ASA 5520 https://community.cisco.com/t5/network-security/show-active-tcp-connections-in-asa-5520/m-p/2225826#M348551 <HTML><HEAD></HEAD><BODY><P>This output shows the same number as if I were to enter 'show conn count' or "show conn detail protocol udp"</P></BODY></HTML> Thu, 06 Jun 2013 17:29:29 GMT https://community.cisco.com/t5/network-security/show-active-tcp-connections-in-asa-5520/m-p/2225826#M348551 bstockslager 2013-06-06T17:29:29Z Show active TCP connections in ASA 5520 https://community.cisco.com/t5/network-security/show-active-tcp-connections-in-asa-5520/m-p/2225827#M348562 <HTML><HEAD></HEAD><BODY><P>Hello Blake,</P><P></P><P>The number will be the same ( as it's the same output of the show conn count) but the connections reflected there are only TCP connections)</P><P></P><P>So if you do not want to manually go one by one counting the amount of TCP connections I would consider using Netflow,</P><P></P><P>I do not know any CLI command for the number of the TCP connections, it would be an aggregate of both UDP/TCP</P><P></P><P>Regards</P><P></P><P>Remember to rate all of the helpful posts, that is as important as a thanks</P></BODY></HTML> Thu, 06 Jun 2013 17:55:37 GMT https://community.cisco.com/t5/network-security/show-active-tcp-connections-in-asa-5520/m-p/2225827#M348562 Julio Carvajal 2013-06-06T17:55:37Z