topic Cisco PIX/ASA - establish session with vdsl modem in Network Security

Cisco PIX/ASA - establish session with vdsl modem

atacan2006 — Tue, 12 Mar 2019 01:53:45 GMT

Hi all,

Is there way to configure the vlan tagging or vlan id for the wan port on cisco pix or asa.

The Cisco Firewall connected to the modem in which you save the login information for dialing into the DSL network, must be support VLAN tagging 7

According to the modem instructions the VLAN tagging value must be 7. This VLAN value is provided by T-Online for the dial and use the VDSL2 data connection. Otherwise modem has a link but does not come into internet.

thanks all

Cisco PIX/ASA - establish session with vdsl modem

Julio Carvajal — Thu, 06 Jun 2013 14:24:30 GMT

Hello,

The only way would be by setting it as a trunk link (sub-interface) with vlan ID 7

Regards

Cisco PIX/ASA - establish session with vdsl modem

atacan2006 — Thu, 06 Jun 2013 14:56:21 GMT

Hi jcarvaja,

thanks for your info

is it possible to do it with PIX 501?

regards

Cisco PIX/ASA - establish session with vdsl modem

lanbrown — Thu, 06 Jun 2013 15:26:11 GMT

Trunk support was added to Pix OS 6.3 and later. The 501 does not have VLAN support if I recall correctly.

Even on the ASA, the base license 5505 does not have trunk support on its interfaces, you need the Security Plus license.

Cisco PIX/ASA - establish session with vdsl modem

Julio Carvajal — Thu, 06 Jun 2013 15:33:51 GMT

Follow the next discussion fur further information

https://supportforums.cisco.com/thread/236453

Regards

Cisco PIX/ASA - establish session with vdsl modem

atacan2006 — Thu, 06 Jun 2013 15:46:11 GMT

thanks again