topic Enable Netflow on ASA 5505 for Vlan and interfaces in Network Security

Enable Netflow on ASA 5505 for Vlan and interfaces

Haider Malik — Tue, 12 Mar 2019 01:45:51 GMT

Hello

How can i enable Netflow for each Vlan Or interface indvidually in Cisco ASA ? currently i have setup Netflow and only 2 interfaces are shwoing traffic for Netflow which are not even as my physical or Vlan interfaces . (see screen shot )

EscapeASA# sh interface ip brief

Interface IP-Address OK? Method Status Protocol

Internal-Data0/0 unassigned YES unset up up

Internal-Data0/1 unassigned YES unset up up

Vlan1 192.168.1.1 YES CONFIG up up

Vlan2 92.61.193.131 YES DHCP up up

Vlan5 unassigned YES unset down down

Virtual0 127.0.0.1 YES unset up up

Ethernet0/0 unassigned YES unset up up

Ethernet0/1 unassigned YES unset down down

Ethernet0/2 unassigned YES unset down down

Ethernet0/3 unassigned YES unset down down

Ethernet0/4 unassigned YES unset down down

Ethernet0/5 unassigned YES unset down down

Ethernet0/6 unassigned YES unset down down

Ethernet0/7 unassigned YES unset up up

~~~~~~~~~~~~~~~~~~~~~~ MIB WALK ~~~~~~~~~~~~~~~~~~~~

.1.3.6.1.2.1.2.2.1.2.1 = String: "Adaptive Security Appliance 'Null0' interface"

.1.3.6.1.2.1.2.2.1.2.2 = String: "Adaptive Security Appliance '0' interface"

.1.3.6.1.2.1.2.2.1.2.3 = String: "Adaptive Security Appliance 'Internal-Data0/0' interface"

.1.3.6.1.2.1.2.2.1.2.4 = String: "Adaptive Security Appliance 'Ethernet0/0' interface"

.1.3.6.1.2.1.2.2.1.2.5 = String: "Adaptive Security Appliance 'Ethernet0/1' interface"

.1.3.6.1.2.1.2.2.1.2.6 = String: "Adaptive Security Appliance 'Ethernet0/2' interface"

.1.3.6.1.2.1.2.2.1.2.7 = String: "Adaptive Security Appliance 'Ethernet0/3' interface"

.1.3.6.1.2.1.2.2.1.2.8 = String: "Adaptive Security Appliance 'Ethernet0/4' interface"

.1.3.6.1.2.1.2.2.1.2.9 = String: "Adaptive Security Appliance 'Ethernet0/5' interface"

.1.3.6.1.2.1.2.2.1.2.10 = String: "Adaptive Security Appliance 'Ethernet0/6' interface"

.1.3.6.1.2.1.2.2.1.2.11 = String: "Adaptive Security Appliance 'Ethernet0/7' interface"

.1.3.6.1.2.1.2.2.1.2.12 = String: "Adaptive Security Appliance 'Internal-Data0/1' interface"

.1.3.6.1.2.1.2.2.1.2.13 = String: "Adaptive Security Appliance '_internal_loopback' interface"

.1.3.6.1.2.1.2.2.1.2.14 = String: "Adaptive Security Appliance 'Virtual254' interface"

.1.3.6.1.2.1.2.2.1.2.15 = String: "Adaptive Security Appliance 'inside' interface"

.1.3.6.1.2.1.2.2.1.2.16 = String: "Adaptive Security Appliance 'outside' interface"

.1.3.6.1.2.1.2.2.1.2.17 = String: "Adaptive Security Appliance 'Vlan5' interface"

Kind Regards

Enable Netflow on ASA 5505 for Vlan and interfaces

Julio Carvajal — Tue, 21 May 2013 23:43:31 GMT

We need way more information on this,

Netflow setup

Ip addresses of the servers

etc

Enable Netflow on ASA 5505 for Vlan and interfaces

Haider Malik — Wed, 22 May 2013 02:45:50 GMT

Thank you for replying the post . Here is the details below

EscapeASA# sh run

: Saved

ASA Version 8.2(1)

hostname EscapeASA

enable password /yB/dTCJeUBCqR7U encrypted

passwd 2KFQnbNIdI.2KYOU encrypted

names

interface Vlan1

nameif inside

security-level 100

ip address 192.168.1.1 255.255.255.0

interface Vlan2

nameif outside

security-level 0

ip address dhcp setroute

interface Vlan5

no nameif

security-level 50

no ip address

interface Ethernet0/0

switchport access vlan 2

interface Ethernet0/1

interface Ethernet0/2

interface Ethernet0/3

interface Ethernet0/4

interface Ethernet0/5

interface Ethernet0/6

interface Ethernet0/7

boot system disk0:/asa821-k8.bin

boot system disk0:/Asa821-k8.bin

ftp mode passive

object-group service RDP tcp

port-object eq 3389

object-group protocol TCPUDP

protocol-object udp

protocol-object tcp

object-group service CCTV tcp-udp

port-object eq 9000

object-group service 8080Web tcp-udp

port-object eq 8080

access-list inside_access_in extended permit ip any any

access-list inside_access_in_1 extended permit icmp any any

access-list inside_access_in_1 extended permit ip any any

access-list outside_access_in extended permit icmp any any log disable

access-list outside_access_in extended permit tcp any interface outside object-group RDP

pager lines 24

logging enable

logging timestamp

logging list Usman level debugging

logging monitor emergencies

logging buffered emergencies

logging trap informational

logging history emergencies

logging asdm informational

logging host inside 192.168.1.202

logging host inside 192.168.1.222

logging debug-trace

logging flash-bufferwrap

logging class auth buffered emergencies history emergencies monitor emergencies asdm emergencies

no logging message 106015

no logging message 313001

no logging message 313008

no logging message 106023

no logging message 710003

no logging message 106100

no logging message 101001

no logging message 100000

no logging message 302015

no logging message 302014

no logging message 302013

no logging message 302018

no logging message 302017

no logging message 302016

no logging message 302021

no logging message 302020

flow-export destination inside 192.168.1.80 2055

flow-export destination inside 192.168.1.222 2055

flow-export template timeout-rate 1

flow-export delay flow-create 15

mtu inside 1500

mtu outside 1500

icmp unreachable rate-limit 1 burst-size 1

icmp permit any inside

asdm image disk0:/asdm-625.bin

no asdm history enable

arp timeout 14400

nat-control

global (outside) 1 interface

nat (inside) 1 192.168.1.0 255.255.255.0

nat (inside) 1 0.0.0.0 0.0.0.0

access-group inside_access_in in interface inside control-plane

access-group inside_access_in_1 in interface inside

access-group outside_access_in in interface outside

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00

timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00

timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

dynamic-access-policy-record DfltAccessPolicy

aaa authentication http console LOCAL

aaa authentication ssh console LOCAL

aaa authentication telnet console LOCAL

http server enable

http 192.168.1.0 255.255.255.0 inside

snmp-server enable traps snmp authentication linkup linkdown coldstart

snmp-server enable traps syslog

snmp-server enable traps entity config-change

crypto ipsec security-association lifetime seconds 28800

crypto ipsec security-association lifetime kilobytes 4608000

crypto ca trustpoint ASDM_TrustPoint0

enrollment terminal

subject-name CN=EscapeASA

crl configure

telnet 192.168.1.0 255.255.255.0 inside

telnet timeout 5

ssh 192.168.1.0 255.255.255.0 inside

ssh timeout 5

console timeout 0

dhcpd auto_config outside

dhcpd address 192.168.1.5-192.168.1.132 inside

dhcpd enable inside

threat-detection basic-threat

threat-detection statistics port

threat-detection statistics protocol

threat-detection statistics access-list

threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200

webvpn

class-map global-class

description Netflow_Export_Class

match any

class-map inspection_default

match default-inspection-traffic

policy-map type inspect dns preset_dns_map

parameters

message-length maximum 512

policy-map global_policy

description Netflow_Export_Policy

class inspection_default

inspect dns preset_dns_map

inspect ftp

inspect h323 h225

inspect h323 ras

inspect esmtp

inspect xdmcp

inspect netbios

inspect tftp

inspect http

class global-class

flow-export event-type all destination 192.168.1.222

service-policy global_policy global

prompt hostname context

Cryptochecksum:6ae2b7c02f4ba651faf19e959c309a0b

Enable Netflow on ASA 5505 for Vlan and interfaces

Patrick Moubarak — Wed, 22 May 2013 02:52:05 GMT

you can follow this document but create a policy-map for an interface instead of modifying policy-map global_policy that applies to all interfaces...

https://supportforums.cisco.com/docs/DOC-6114

Here's the 8.4 CLI configuration guide:

http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/monitor_nsel.html

Enable Netflow on ASA 5505 for Vlan and interfaces

Haider Malik — Wed, 22 May 2013 03:43:21 GMT

Thank you i follow the document setup new policy still the same issue .

I checked with wireshark traces . Thank you again for your support is there anything need to included please let me know

https://supportforums.cisco.com/docs/DOC-6114

Here is what my config now looks like matching the post above

access-list global_mpc extended permit ip any any

flow-export destination inside 192.168.1.80 2055

flow-export destination inside 192.168.1.222 2055

class-map global-class

match access-list global_mpc

class-map inspection_default

match default-inspection-traffic

policy-map type inspect dns preset_dns_map

parameters

message-length maximum 512

policy-map global_policy

description Netflow_Export_Policy

class inspection_default

inspect dns preset_dns_map

inspect ftp

inspect h323 h225

inspect h323 ras

inspect esmtp

inspect xdmcp

inspect netbios

inspect tftp

inspect http

class global-class

flow-export event-type all destination 192.168.1.80 192.168.1.222

service-policy global_policy global

prompt hostname context

Enable Netflow on ASA 5505 for Vlan and interfaces

Patrick Moubarak — Wed, 22 May 2013 04:07:47 GMT

can you post the output of show flow-export counters
and show logging flow-export-syslogs

Enable Netflow on ASA 5505 for Vlan and interfaces

Haider Malik — Wed, 22 May 2013 04:19:12 GMT

EscapeASA# sh flow-export counter

destination: inside 192.168.1.80 2055

Statistics:

packets sent 630

Errors:

block allocation failure 0

invalid interface 0

template send failure 0

destination: inside 192.168.1.222 2055

Statistics:

packets sent 630

Errors:

block allocation failure 0

invalid interface 0

template send failure 0

EscapeASA# show logging flow

EscapeASA# show logging flow-export-syslogs

Syslog ID Type Status

302013 Flow Created Disabled

302015 Flow Created Disabled

302017 Flow Created Disabled

302020 Flow Created Disabled

302014 Flow Deleted Disabled

302016 Flow Deleted Disabled

302018 Flow Deleted Disabled

302021 Flow Deleted Disabled

106015 Flow Denied Disabled

106023 Flow Denied Disabled

313001 Flow Denied Disabled

313008 Flow Denied Disabled

710003 Flow Denied Disabled

106100 Flow Created/Denied Disabled

Enable Netflow on ASA 5505 for Vlan and interfaces

Julio Carvajal — Wed, 22 May 2013 17:01:18 GMT

Hello Gold,

Remember that there are only 3 events that will create/generate a record event

flow-create

flow-denied

flow-teardown

Can you add the following command:

flow template timeout-rate 1

Regards

Enable Netflow on ASA 5505 for Vlan and interfaces

Haider Malik — Wed, 22 May 2013 20:27:41 GMT

I have added the below command .

EscapeASA# sh run | include template

flow-export template timeout-rate 1

EscapeASA#

however i dont see any progress i am not able see flows from all the interfaces and vlans's .

only following are generating as per my first post even after making changes .

https://supportforums.cisco.com/servlet/JiveServlet/download/3941110-15360396/ASA%20NTA.PNG

again thanking your support any further changes need to be done ?

Re: Enable Netflow on ASA 5505 for Vlan and interfaces

Julio Carvajal — Wed, 22 May 2013 21:32:37 GMT

Hello Gold,

Okay let's start from the bottom.. I will focus on the explanation this time

How can i enable Netflow for each Vlan Or interface indvidually in Cisco ASA?

You enable this on the ASA via the MPF setup, so if you want just to see record events for the inside traffic only match traffic that goes and starts on that interface ( this with an ACL ).

currently i have setup Netflow and only 2 interfaces are shwoing traffic for Netflow which are not even as my physical or Vlan interfaces .

Well you have only 2 interfaces UP and running (the SVI's 2 and 1) (physical port 1 and 7), So I would say that is accurate.

Now what it does seem weird is the interface name you are seeing on the netflow collector, I mean what is interface Null 0. That just does sound accurate...

What neflow collector software are you using?