Very Basic and Urgent Question.

usmanghani255 — Tue, 12 Mar 2019 01:31:33 GMT

QUESTION:

How to add following on ASA Firewall.

10.127.4.111 – SAPWFT tree Primary

10.127.4.112 – SAPEXT tree Primary

10.127.4.114 – SAPWFT tree Secondary

10.127.4.115 – SAPEXT tree Secondary

What I DID:

name 10.127.4.111 SAPWFT

name 10.127.4.112 SAPEXT

name 10.127.4.114 SAPWFT

name 10.127.4.115 SAPEXT

object-group network tESTING-lAB

network-object host SAPWFT

network-object host SAPEXT

network-object host SAPWFT

network-object host SAPEX

What eroor i am faced After adding in ASA Firewall.

R1(config)# name 10.137.4.111 SAPWFT

R1(config)# name 10.137.4.112 SAPEXT

R1(config)# name 10.137.4.114 SAPWFT

ERROR: 'SAPWFT' is already mapped to 10.137.4.111!

R1(config)# name 10.137.4.115 SAPEXT

ERROR: 'SAPEXT' is already mapped to 10.137.4.112!

Please tell me how i should add above IP Addresses with same name in Object Group. What are the different ways to add . Thanks

Re: Very Basic and Urgent Question.

Jouni Forss — Fri, 19 Apr 2013 11:51:01 GMT

Hi,

If you plan on using the "name" configuration then naturally you CANT give the same name to two differnet IP addresses.

You could consider something like this?

name 10.127.4.111 SAPWFT-PRI

name 10.127.4.112 SAPEXT-PRI

name 10.127.4.114 SAPWFT-SEC

name 10.127.4.115 SAPEXT-SEC

- Jouni