topic How to reflash Cisco ASA 5510? in Network Security https://community.cisco.com/t5/network-security/how-to-reflash-cisco-asa-5510/m-p/2248239#M357450 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Thanks for the quick reply. The unit power on with no problem, but I have the Status and the Active light on solid amber. I have made some research here and on the internet, but I was not able to find a fix on that. I am trying to connect with putty with no luck. I can have a flash card, but I am not sure it will read it. Actually I do not know what else to do.</P><P></P><P>JS</P></BODY></HTML> Sat, 25 May 2013 22:06:54 GMT JuanSanchez64 2013-05-25T22:06:54Z How to reflash Cisco ASA 5510? https://community.cisco.com/t5/network-security/how-to-reflash-cisco-asa-5510/m-p/2248237#M357447 <P>I have an unit totally death (solid orange light at status and active). I can't access the unit in anyway. I guess I have to reflah it. Someone can help me explaining steps by steps how to do this?</P><P>Thanks in advance.</P> Tue, 12 Mar 2019 01:49:11 GMT https://community.cisco.com/t5/network-security/how-to-reflash-cisco-asa-5510/m-p/2248237#M357447 JuanSanchez64 2019-03-12T01:49:11Z How to reflash Cisco ASA 5510? https://community.cisco.com/t5/network-security/how-to-reflash-cisco-asa-5510/m-p/2248238#M357449 <HTML><HEAD></HEAD><BODY><P>Hello Juan,</P><P></P><P>You mean the box does not power on??</P><P></P><P>If that's the case I would recommend an RMA,</P><P></P><P>Regards</P></BODY></HTML> Sat, 25 May 2013 21:26:47 GMT https://community.cisco.com/t5/network-security/how-to-reflash-cisco-asa-5510/m-p/2248238#M357449 Julio Carvajal 2013-05-25T21:26:47Z How to reflash Cisco ASA 5510? https://community.cisco.com/t5/network-security/how-to-reflash-cisco-asa-5510/m-p/2248239#M357450 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Thanks for the quick reply. The unit power on with no problem, but I have the Status and the Active light on solid amber. I have made some research here and on the internet, but I was not able to find a fix on that. I am trying to connect with putty with no luck. I can have a flash card, but I am not sure it will read it. Actually I do not know what else to do.</P><P></P><P>JS</P></BODY></HTML> Sat, 25 May 2013 22:06:54 GMT https://community.cisco.com/t5/network-security/how-to-reflash-cisco-asa-5510/m-p/2248239#M357450 JuanSanchez64 2013-05-25T22:06:54Z How to reflash Cisco ASA 5510? https://community.cisco.com/t5/network-security/how-to-reflash-cisco-asa-5510/m-p/2248240#M357451 <HTML><HEAD></HEAD><BODY><P>Juan,</P><P></P><P>Better to be connected to console and then restart the ASA. I hope you got your console settings as follows:</P><P></P><P>9600 baud (default), 8 data bits, no parity, 1 stop bits, and Flow Control (FC) = Hardware. </P><P></P><P>Once you restart ASA and are able to see the console output , you can even press ESC or Ctrl-Break to go to ROMMON. </P><P></P><P>You can even load the image through TFTP even without an operational flash.You can follow the section "Using the ROM Monitor to Load a Software Image" </P><P></P><P><A class="jive-link-external-small" href="http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/admin_trouble.html#wp1076206">http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/admin_trouble.html#wp1076206</A></P><P></P><P></P><P>Regards</P><P>Gautam</P></BODY></HTML> Sun, 26 May 2013 05:24:29 GMT https://community.cisco.com/t5/network-security/how-to-reflash-cisco-asa-5510/m-p/2248240#M357451 Gautam Bhagwandas 2013-05-26T05:24:29Z How to reflash Cisco ASA 5510? https://community.cisco.com/t5/network-security/how-to-reflash-cisco-asa-5510/m-p/2248241#M357452 <HTML><HEAD></HEAD><BODY><P>Thanks Gautam, unfortunately when I connect via hyper terminal I do not have any response from the unit. It says connected, but I doubt it is. I am still stuck before the ESC part.</P><P></P><P>JS</P></BODY></HTML> Sun, 26 May 2013 11:18:59 GMT https://community.cisco.com/t5/network-security/how-to-reflash-cisco-asa-5510/m-p/2248241#M357452 JuanSanchez64 2013-05-26T11:18:59Z How to reflash Cisco ASA 5510? https://community.cisco.com/t5/network-security/how-to-reflash-cisco-asa-5510/m-p/2248242#M357453 <HTML><HEAD></HEAD><BODY><P>Then you should simply RMA the box. Of course, assuming you have a support contract. </P></BODY></HTML> Sun, 26 May 2013 14:00:58 GMT https://community.cisco.com/t5/network-security/how-to-reflash-cisco-asa-5510/m-p/2248242#M357453 stefan.radovanovici 2013-05-26T14:00:58Z