topic allow printing through cisco asa in Network Security

allow printing through cisco asa

belmoudden.khadija — Tue, 12 Mar 2019 01:24:24 GMT

hello,

I have a Cisco ASA 5505 and i need to allow printing from an outside network, i'm having trouble figuring out how exactly to do this.

any suggestions please?

lcambron — Sat, 06 Apr 2013 00:39:00 GMT

Hello,

We will need to know what service and ports are used by the printer.

Then you can configure and ACL and static nat to allow the connection.

If you can't get this information, then I would start setting up some captures on the ASA to try to find out the service/ports.

Example:

cap test interface outside match ip host source_IP host destination_IP

Regards,

Felipe.

belmoudden.khadija — Sat, 06 Apr 2013 10:54:21 GMT

hello,

i used the following line command to nat the printing port: 9100

static (inside,outside) tcp outside_ip_address 9100 printer_ip_address 9100 netmask 255.255.255.255

and i used access lists to autorise the connection between the distant server and the printer

regards,

ranasaadnoori — Sun, 05 Feb 2017 08:15:12 GMT

hi did your configuration work cause i have the same problem asa 5520