Enabling the ASDM

Andy White — Tue, 12 Mar 2019 01:22:46 GMT

Hello,

I am just running up a new ASA and want to access the ADSM, but get this error what trying to access it from a web browser:

ASA Version 8.4(2)

hostname ciscoasa

enable password 8Ry2YjIyt7RRXU24 encrypted

passwd 2KFQnbNIdI.2KYOU encrypted

names

interface GigabitEthernet0

shutdown

no nameif

no security-level

no ip address

interface GigabitEthernet1

nameif inside

security-level 0

ip address 192.168.0.70 255.255.255.0

interface GigabitEthernet2

shutdown

no nameif

no security-level

no ip address

interface GigabitEthernet3

shutdown

no nameif

no security-level

no ip address

interface GigabitEthernet4

shutdown

no nameif

no security-level

no ip address

interface GigabitEthernet5

shutdown

no nameif

no security-level

no ip address

ftp mode passive

pager lines 24

mtu inside 1500

no failover

icmp unreachable rate-limit 1 burst-size 1

asdm image disk0:/asdm-647.bin

no asdm history enable

arp timeout 14400

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00

timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00

timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

timeout floating-conn 0:00:00

dynamic-access-policy-record DfltAccessPolicy

user-identity default-domain LOCAL

aaa authentication enable console LOCAL

aaa authentication ssh console LOCAL

aaa authorization command LOCAL

aaa authorization exec LOCAL

http server enable

http 192.168.0.0 255.255.255.0 inside

http 0.0.0.0 0.0.0.0 inside

no snmp-server location

no snmp-server contact

snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart

telnet timeout 5

ssh 192.168.0.0 255.255.255.0 inside

ssh timeout 5

console timeout 0

threat-detection basic-threat

threat-detection statistics access-list

no threat-detection statistics tcp-intercept

webvpn

username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15

prompt hostname context

no call-home reporting anonymous

call-home

profile CiscoTAC-1

no active

destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService

destination address email callhome@cisco.com

destination transport-method http

subscribe-to-alert-group diagnostic

subscribe-to-alert-group environment

subscribe-to-alert-group inventory periodic monthly

subscribe-to-alert-group configuration periodic monthly

subscribe-to-alert-group telemetry periodic daily

crashinfo save disable

Cryptochecksum:442964d41090b58bd7f104129f3e60e6

: end

ciscoasa#

ciscoasa# sh flash:

--#-- --length-- -----date/time------ path

5 4096 Apr 02 2013 17:14:40 log

13 4096 Apr 02 2013 17:14:46 coredumpinfo

14 59 Apr 02 2013 17:14:46 coredumpinfo/coredump.cfg

18 4096 Apr 02 2013 20:26:36 boot

19 6 Apr 02 2013 21:17:44 boot/grub.conf

81 0 Apr 02 2013 20:28:42 nat_ident_migrate

91 4202496 Apr 02 2013 21:01:00 asdm-647.bin

ciscoasa# debug http

debug http enabled at level 1.

ciscoasa#

ciscoasa# HTTP: session verified = [0]

HTTP: processing GET URL '/admin/public/index.html' from host 192.168.0.2

HTTP: authentication not required

HTTP: file not found: public/index.html

HTTP: processing handoff to legacy admin server [/favicon.ico]

HTTP: session verified = [0]

HTTP: processing GET URL '/favicon.ico' from host 192.168.0.2

HTTP: authentication required, no authentication information was provided

any ideas?

Enabling the ASDM

Jouni Forss — Tue, 02 Apr 2013 21:44:04 GMT

Hi,

I guess you could try adding

aaa authentication http console LOCAL

And use the username "cisco" and its password to log in.

Atleast the error message seems to hint that something is wrong related to the authentication.

Did you try

https://192.168.0.70/ while connecting to the ASA by browser?

- Jouni

Enabling the ASDM

fb_webuser — Wed, 03 Apr 2013 03:42:55 GMT

Hello, https://192.168.0.70/admin

Are you using that url ?

---

Posted by WebUser Paul Carco from Cisco Support Community App

Enabling the ASDM

Andy White — Wed, 03 Apr 2013 20:05:04 GMT

Still no luck, can I download the ASDM manually?

It can't seem to find

HTTP: file not found: public/index.html, will this be loacted in the flash?

Enabling the ASDM

Andy White — Wed, 03 Apr 2013 20:18:13 GMT

Fixed - just removed the asdm bin file and downloaded it again and all works - strange as I did this yesterday, so I'm not sure what this issue was in the end.

topic Enabling the ASDM in Network Security

Enabling the ASDM

Enabling the ASDM

Enabling the ASDM

Enabling the ASDM

Enabling the ASDM