Cisco ASA 5510 cannot create a Interface VLAN?

Rommel Papa — Tue, 12 Mar 2019 01:19:12 GMT

Hi Guys,

May I know the reason why we cannot create interface vlan on Cisco ASA 5510?

Thank you very much..

Re: Cisco ASA 5510 cannot create a Interface VLAN?

Jouni Forss — Mon, 25 Mar 2013 05:19:36 GMT

Hi,

You can only do this on an ASA5505 which has a built in switch module.

On the other ASA models you will create a Trunk from one of the Physical interfaces of the ASA. You do this by creating sub interface for a certain Vlan and not a Vlan interface

For example you have the physical interface

interface GigabitEthernet0/0

description Trunk

no nameif

no security-level

no ip address

interface GigabitEthernet0/0.100

description VLAN 100

vlan 100

nameif vlan-100

security-level 100

ip add 10.10.100.1 255.255.255.0

interface GigabitEthernet0/0.200

description VLAN 200

vlan 200

nameif vlan-200

security-level 100

ip add 10.10.200.1 255.255.255.0

And so on for example

Hope this helps If so, remember to rate the answer. Do ask more if needed

- Jouni

Cisco ASA 5510 cannot create a Interface VLAN?

Rommel Papa — Mon, 25 Mar 2013 05:31:56 GMT

Thank you very much..Very helpful..

topic Cisco ASA 5510 cannot create a Interface VLAN? in Network Security

Cisco ASA 5510 cannot create a Interface VLAN?

Re: Cisco ASA 5510 cannot create a Interface VLAN?

Cisco ASA 5510 cannot create a Interface VLAN?