topic FIREWALL SYNCHRONIZATION in Network Security https://community.cisco.com/t5/network-security/firewall-synchronization/m-p/2169137#M360577 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Can you rather show the output of "show failover"</P><P></P><P>What is the software version used?</P><P></P><P>I havent personally run into many situations/problems with configurations sync.</P><P></P><P>Only situation was when the previous Sync got stuck and didnt finish. In the end it required a complete erase of the Standby unit configurations and reconfiguring it will Failover configurations and connecting back to the network.</P><P></P><P>Never knew what caused the Sync problem then but at that moment it was causing problems for the Active device also so didnt have time/option to troubleshoot further.</P><P></P><P>- Jouni</P></BODY></HTML> Fri, 08 Mar 2013 13:15:27 GMT Jouni Forss 2013-03-08T13:15:27Z FIREWALL SYNCHRONIZATION https://community.cisco.com/t5/network-security/firewall-synchronization/m-p/2169136#M360574 <P>ASA firewall failover not synchronizing... Here is the result of show failover. The configuration appears to be correct but we don’t understand why the devices are not syncing.</P><P>.</P><P></P><P></P><P></P><P><STRONG>ASA-EXTRANET# sh run failover</STRONG></P><P></P><P>failover</P><P></P><P>failover lan unit primary</P><P></P><P>failover lan interface FOVER GigabitEthernet0/3</P><P></P><P>failover link FOVER GigabitEthernet0/3</P><P></P><P>failover interface ip FOVER 100.100.100.10 255.255.255.0 standby 100.100.100.11</P><P> ASA-EXTRANET#</P><P></P><P></P><P></P><P>Regards,</P><P>Ethelbert</P> Tue, 12 Mar 2019 01:11:36 GMT https://community.cisco.com/t5/network-security/firewall-synchronization/m-p/2169136#M360574 ETHELBERT EZEAPUTA 2019-03-12T01:11:36Z FIREWALL SYNCHRONIZATION https://community.cisco.com/t5/network-security/firewall-synchronization/m-p/2169137#M360577 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Can you rather show the output of "show failover"</P><P></P><P>What is the software version used?</P><P></P><P>I havent personally run into many situations/problems with configurations sync.</P><P></P><P>Only situation was when the previous Sync got stuck and didnt finish. In the end it required a complete erase of the Standby unit configurations and reconfiguring it will Failover configurations and connecting back to the network.</P><P></P><P>Never knew what caused the Sync problem then but at that moment it was causing problems for the Active device also so didnt have time/option to troubleshoot further.</P><P></P><P>- Jouni</P></BODY></HTML> Fri, 08 Mar 2013 13:15:27 GMT https://community.cisco.com/t5/network-security/firewall-synchronization/m-p/2169137#M360577 Jouni Forss 2013-03-08T13:15:27Z