topic Transparent Mode and Logging in Network Security https://community.cisco.com/t5/network-security/transparent-mode-and-logging/m-p/2160270#M361624 <HTML><HEAD></HEAD><BODY><P>Hello Will, </P><P></P><P>Havent try it, but I am sure you should be able to Use the OOB management interface (management 0/0) to accomplish such. </P><P></P><P>Let us know. </P><P></P><P>Mike</P></BODY></HTML> Mon, 25 Feb 2013 23:40:24 GMT Maykol Rojas 2013-02-25T23:40:24Z Transparent Mode and Logging https://community.cisco.com/t5/network-security/transparent-mode-and-logging/m-p/2160269#M361623 <P>Is it possible for an 5505 ASA to be in transparent mode such as ethernet0/0 outside, ethernet 0/1 inside, and use ethernet 0/2 for syslog only on a seperate network other than the one that 0/0 and 0/1 is using.&nbsp; The tranparent part being on a 192.168.168.X/24 and the syslog server being on say a 10.2.1.X/24 network?</P><P></P><P>Thanks</P> Tue, 12 Mar 2019 01:03:56 GMT https://community.cisco.com/t5/network-security/transparent-mode-and-logging/m-p/2160269#M361623 wjjohnson8844 2019-03-12T01:03:56Z Transparent Mode and Logging https://community.cisco.com/t5/network-security/transparent-mode-and-logging/m-p/2160270#M361624 <HTML><HEAD></HEAD><BODY><P>Hello Will, </P><P></P><P>Havent try it, but I am sure you should be able to Use the OOB management interface (management 0/0) to accomplish such. </P><P></P><P>Let us know. </P><P></P><P>Mike</P></BODY></HTML> Mon, 25 Feb 2013 23:40:24 GMT https://community.cisco.com/t5/network-security/transparent-mode-and-logging/m-p/2160270#M361624 Maykol Rojas 2013-02-25T23:40:24Z