topic NAT'ing a port range from a loopback in Network Security https://community.cisco.com/t5/network-security/nat-ing-a-port-range-from-a-loopback/m-p/2149251#M361678 <HTML><HEAD></HEAD><BODY><P>Anyone?</P></BODY></HTML> Thu, 21 Feb 2013 23:58:33 GMT ozmetaldrummer 2013-02-21T23:58:33Z NAT'ing a port range from a loopback https://community.cisco.com/t5/network-security/nat-ing-a-port-range-from-a-loopback/m-p/2149250#M361676 <P>Hi Everyone,</P><P>I am new to the community and this is my first post. If I have not provided enough information or have formatted my discussion wrong, please let me know so I can improve my future posts.</P><P></P><P>I need to NAT a port range spanning from TCP and UDP 50,000 to 59,999 from inside global address 58.96.x.x on loopback2 to an inside local address of 192.168.5.5.</P><P></P><P>Currently all the existing NAT translations are 1-to-1 that map inside global addresses on a wide span of Loopbacks and a Dialer Interface to inside local addresses on few subnets which are fine.</P><P></P><P>I'm using an 1811 with an ADVIPSERVICESK9-M image, version 12.4(6)TS</P><P></P><P>Any help would be great!</P><P></P><P>Let me know if you need some config</P> Tue, 12 Mar 2019 01:03:30 GMT https://community.cisco.com/t5/network-security/nat-ing-a-port-range-from-a-loopback/m-p/2149250#M361676 ozmetaldrummer 2019-03-12T01:03:30Z NAT'ing a port range from a loopback https://community.cisco.com/t5/network-security/nat-ing-a-port-range-from-a-loopback/m-p/2149251#M361678 <HTML><HEAD></HEAD><BODY><P>Anyone?</P></BODY></HTML> Thu, 21 Feb 2013 23:58:33 GMT https://community.cisco.com/t5/network-security/nat-ing-a-port-range-from-a-loopback/m-p/2149251#M361678 ozmetaldrummer 2013-02-21T23:58:33Z