topic problem de ping vers le outside in Network Security https://community.cisco.com/t5/network-security/problem-de-ping-vers-le-outside/m-p/2093163#M393388 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>You need to configure an ACL that permits icmp and apply it on the outside interface.</P><P>If you didn't NAT from inside to outside then you must be sure that nat-control is disabled( show run nat-control) and that you have&nbsp; the correct static routes in place on the Pix and on the router.</P><P>Can you post the configs from the pix and the router.</P><P></P><P>Regards.</P><P></P><P>Alain</P><P></P><P></P><P>Don't forget to rate helpful posts.</P></BODY></HTML> Mon, 07 Jan 2013 09:16:05 GMT cadet alain 2013-01-07T09:16:05Z problem de ping vers le outside https://community.cisco.com/t5/network-security/problem-de-ping-vers-le-outside/m-p/2093162#M393385 <P>bonjour ,</P><P>je suis un débutant j'ai un pix 535 et je fait une maquette </P><P></P><P>un réseaux connecté a l'interface inside @ 10.0.20.0/24</P><P></P><P>l@ de l'interface inside c'est 10.0.20.1</P><P></P><P></P><P>a l'interface outside ety connecté un router 2800 </P><P>@ de outside c'est 192.168.100.160 /30 </P><P></P><P></P><P>et d' ariere le router je simule un réseau @ 10.1.140.0/24</P><P></P><P></P><P>j'ai fait le routage static </P><P></P><P></P><P>mais je peut pas piger de 10.0.20.0/24 vers le réseau 10.1.140.0/24</P><P>et méme pas l'interface outside </P><P></P><P></P><P>??????????????????????</P><P></P><P>svp aider moi </P> Tue, 12 Mar 2019 00:43:39 GMT https://community.cisco.com/t5/network-security/problem-de-ping-vers-le-outside/m-p/2093162#M393385 k.raouf05 2019-03-12T00:43:39Z problem de ping vers le outside https://community.cisco.com/t5/network-security/problem-de-ping-vers-le-outside/m-p/2093163#M393388 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>You need to configure an ACL that permits icmp and apply it on the outside interface.</P><P>If you didn't NAT from inside to outside then you must be sure that nat-control is disabled( show run nat-control) and that you have&nbsp; the correct static routes in place on the Pix and on the router.</P><P>Can you post the configs from the pix and the router.</P><P></P><P>Regards.</P><P></P><P>Alain</P><P></P><P></P><P>Don't forget to rate helpful posts.</P></BODY></HTML> Mon, 07 Jan 2013 09:16:05 GMT https://community.cisco.com/t5/network-security/problem-de-ping-vers-le-outside/m-p/2093163#M393388 cadet alain 2013-01-07T09:16:05Z