recursive infinite Object NAT in ASA

r5a5m5 — Tue, 12 Mar 2019 00:40:07 GMT

Dear All,

If i use the following config in ASA. what will happen..?

object network inside_10

host 10.10.10.10

object network outide_192

host 192.192.192.1

object network inside_10

nat static outide_192

object network outide_192

nat static inside_10

My point view is given below.

1. 10.10.10.10 host is natted to 192.192.192.1

2. 192.192.192.1 is natted to 10.10.10.10 then Step 1 will occur again.

Any traffic will not be forwarded from 10.10.10.10/192.192.192.1 and it get stuck in the NAT process indefinitely.....

"A good rating is as good or even better than a thank you, remember to rate the helpful posts "

r5a5m5 — Wed, 26 Dec 2012 10:22:57 GMT

Any Update or answer for this question ??

Andrew Phirsov — Wed, 26 Dec 2012 13:28:24 GMT

Traffic will go in both directions without any problems. This two rules will work separately from each other.

topic recursive infinite Object NAT in ASA in Network Security