topic Cisco ASA firewall/Router/Switch support SNMP v3 Read-Write ? in Network Security https://community.cisco.com/t5/network-security/cisco-asa-firewall-router-switch-support-snmp-v3-read-write/m-p/2133934#M393949 <HTML><HEAD></HEAD><BODY><P>Hello Velavan,</P><P></P><P>The ASA supports traps and SNMP read access, but does not support SNMP write access.</P><P></P><P>I am not sure about the routers and switches but the ASA does not. </P><P></P><P>Regards,</P><P>Juan Lombana</P><P></P><P>Please rate helpful posts.</P></BODY></HTML> Thu, 20 Dec 2012 13:18:52 GMT julomban 2012-12-20T13:18:52Z Cisco ASA firewall/Router/Switch support SNMP v3 Read-Write ? https://community.cisco.com/t5/network-security/cisco-asa-firewall-router-switch-support-snmp-v3-read-write/m-p/2133933#M393942 <P>Hello </P><P></P><P>Cisco ASA firewall/Router/Switch support SNMP v3 Read-Write ?</P><P></P><P>thanks in advance </P><P>velavan</P> Tue, 12 Mar 2019 00:38:58 GMT https://community.cisco.com/t5/network-security/cisco-asa-firewall-router-switch-support-snmp-v3-read-write/m-p/2133933#M393942 velavan.r 2019-03-12T00:38:58Z Cisco ASA firewall/Router/Switch support SNMP v3 Read-Write ? https://community.cisco.com/t5/network-security/cisco-asa-firewall-router-switch-support-snmp-v3-read-write/m-p/2133934#M393949 <HTML><HEAD></HEAD><BODY><P>Hello Velavan,</P><P></P><P>The ASA supports traps and SNMP read access, but does not support SNMP write access.</P><P></P><P>I am not sure about the routers and switches but the ASA does not. </P><P></P><P>Regards,</P><P>Juan Lombana</P><P></P><P>Please rate helpful posts.</P></BODY></HTML> Thu, 20 Dec 2012 13:18:52 GMT https://community.cisco.com/t5/network-security/cisco-asa-firewall-router-switch-support-snmp-v3-read-write/m-p/2133934#M393949 julomban 2012-12-20T13:18:52Z Cisco ASA firewall/Router/Switch support SNMP v3 Read-Write ? https://community.cisco.com/t5/network-security/cisco-asa-firewall-router-switch-support-snmp-v3-read-write/m-p/2133935#M393953 <HTML><HEAD></HEAD><BODY><P>Adding to Juan's correct answer, the ASA does support SNMP v3 (read) since Version 8.2(1). If your software is older than that, only SNMP v1 or v2c will be supported (still read-only).</P><P></P><P>Configuration steps are listed in the guide here:</P><P></P><P><A class="jive-link-external-small" href="http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/monitor_snmp.html#wp1239780">http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/monitor_snmp.html#wp1239780</A></P></BODY></HTML> Thu, 20 Dec 2012 20:52:50 GMT https://community.cisco.com/t5/network-security/cisco-asa-firewall-router-switch-support-snmp-v3-read-write/m-p/2133935#M393953 Marvin Rhoads 2012-12-20T20:52:50Z