topic Multiple NAT translation for Same IP in Network Security https://community.cisco.com/t5/network-security/multiple-nat-translation-for-same-ip/m-p/2101131#M394119 <P>Is it possible to have multiple NAT translation for same IP </P><P></P><P>We have a NAT statement as follows.</P><P></P><P>10.0.0.1 -- &gt; 100.10.10.10</P><P></P><P>10.0.0.0/24 - 10.0.0.0/24 - Identity NAT for the traffic between same ranges. But this is not using when we have the first nat rule (NAT TO A PUBLIC IP) is&nbsp; in place.</P> Tue, 12 Mar 2019 00:37:13 GMT Hari Vishnu 2019-03-12T00:37:13Z Multiple NAT translation for Same IP https://community.cisco.com/t5/network-security/multiple-nat-translation-for-same-ip/m-p/2101131#M394119 <P>Is it possible to have multiple NAT translation for same IP </P><P></P><P>We have a NAT statement as follows.</P><P></P><P>10.0.0.1 -- &gt; 100.10.10.10</P><P></P><P>10.0.0.0/24 - 10.0.0.0/24 - Identity NAT for the traffic between same ranges. But this is not using when we have the first nat rule (NAT TO A PUBLIC IP) is&nbsp; in place.</P> Tue, 12 Mar 2019 00:37:13 GMT https://community.cisco.com/t5/network-security/multiple-nat-translation-for-same-ip/m-p/2101131#M394119 Hari Vishnu 2019-03-12T00:37:13Z Multiple NAT translation for Same IP https://community.cisco.com/t5/network-security/multiple-nat-translation-for-same-ip/m-p/2101132#M394120 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>There should be no problem with translating one IP address to many BUT this usually means somekind of Policy NAT when we are trying to translate one IP address to many different ones on a single destination interface.</P><P></P><P>Can you give a brief description of the whole setup you want to achieve?</P><P></P><P>Also we need to know your firewalls software level.</P><P></P><P>- Jouni</P></BODY></HTML> Fri, 14 Dec 2012 07:11:49 GMT https://community.cisco.com/t5/network-security/multiple-nat-translation-for-same-ip/m-p/2101132#M394120 Jouni Forss 2012-12-14T07:11:49Z