FWSM Image Upgrade ...

sanjay.nadarajah — Tue, 12 Mar 2019 00:05:30 GMT

Hi,

I need to upgrade an FWSM module from version 4.0(10) to 4.1(10) and also upgrade the ASDM from version 6.1(5) F to version 6.2 (2)F.

This is the document that I have found :-

This is the steps that needs to be done according to the above URL :-

----------------------------------------------------------------------------------------------------------------

Step 1 If you have a Cisco.com login, you can obtain the OS and ASDM images from the following website:
http://www.cisco.com/cisco/software/navigator.html?a=a&i=rpm

Step 2 For multiple context mode, change to the system execution space:

hostname# changeto system

Step 3 Install the new OS using TFTP:

hostname# copy tftp://server[/path]/filename flash:

For example:

hostname# copy tftp://10.1.1.1/c6svc-fwm-k9.4-1-1.bin flash:

Step 4 Install the new ASDM using TFTP:

hostname# copy tftp://server[/path]/filename flash:asdm

For example:

hostname# copy tftp://10.1.1.1/asdm-621f.bin flash:asdm

Step 5 To reload to start running the new software, enter the following command:

hostname# reload

----------------------------------------------------------------------------------------------------------------

My question is :-

i) Is this is all is needed to be done ?

ii) This FWSM is running on active/active mode ? Is there anything specific that I need to do ?

Thanks in advance.

Cheers,

- sn -

Marvin Rhoads — Sun, 07 Oct 2012 19:13:22 GMT

Please refer to the configuration guide for more details on upgrading an Active/Active failover pair.

It details the few extra steps necessary on a failover pair.

topic FWSM Image Upgrade ... in Network Security