topic CISCO ASA5510 Firewall transparent mode in Network Security

CISCO ASA5510 Firewall transparent mode

turbie_cisco — Mon, 11 Mar 2019 23:52:17 GMT

Hi,

i have a ASA5510 in the office, that already configured 3 context, namely, admin, user, server.

in the server context, the last running config was not saved, and there was a power trip last friday night. 1 of the sub interface was affected, and i need to recreate that interface.

how do I do it?

I am getting the below error, it only allow me to do changes those pre-defined interface.

kul-fw-03/admin(config)# interface ethernet 0/2.111

ERROR: % Invalid input detected at '^' marker.

how to I create extra sub interface?

PS: the current config is done by the network guy who left the company last month.:(

please help.

CISCO ASA5510 Firewall transparent mode

Jennifer Halim — Tue, 11 Sep 2012 04:46:52 GMT

you would need to configure it from the System context, not the Admin context.

If you are trying to add the sub interfaces for the server context, then go to the System context:

config t

interface ethernet 0/2.111

exit

context server

allocate-interface ethernet0/2.111

here is a sample configuration for your reference:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808d2b63.shtml

Hope that helps.

CISCO ASA5510 Firewall transparent mode

turbie_cisco — Wed, 26 Sep 2012 07:24:27 GMT

Hi Jannifer,

was once straggle how to get into sysem context, at the end I am loggin in using the roll over cable to the firewall.

thanks for your kind assistance.

CISCO ASA5510 Firewall transparent mode

Jennifer Halim — Thu, 27 Sep 2012 21:10:14 GMT

Great to know all is working good now. Pls kindly mark your post answered so others can learn from it. Thank you.