topic Cisco ASA 5520, Can't login to Privilge mode ? in Network Security

Cisco ASA 5520, Can't login to Privilge mode ?

Hidayat Khan — Mon, 11 Mar 2019 23:51:25 GMT

Hi,

I have added Cisco 5520 into the Cisco ACS 4.2 Tacacs Server. I can login to the user mode, but I can't login to the privilege mode ? though I have put enable password, but when I use that password, no joy ?

Rgds

Hid

Cisco ASA 5520, Can't login to Privilge mode ?

Julio Carvajal — Fri, 07 Sep 2012 16:41:07 GMT

Hello Hidayat,

There is something wrong with the AAA setup.

Now you need to fix that in order to be able to login, what we will do here is bypass the enable password.

So let's say you SSH into the ASA you get the username and password promt.

As soon as you get here place login so you can authenticate again using the username and password and be on privilege mode.

asa>login

You are in, fix the problem with the AAA

Regards,

Julio

Re: Cisco ASA 5520, Can't login to Privilge mode ?

gurpsin2 — Sat, 08 Sep 2012 18:14:23 GMT

Hey hid,

Make sure you hv created a user on acs with same password you r using on ASA

Also, on the ASA, you could try the command " login" and then enter username n password b4 getting into privilege mode.

Sent from Cisco Technical Support iPhone App

Cisco ASA 5520, Can't login to Privilge mode ?

Hidayat Khan — Tue, 11 Sep 2012 16:02:12 GMT

Thanks Julio and G singh,

On the Cisco ACS we use group for authentication with full admin access. Is there any specific config needed on the admin group which then points to the AD ?

Thx

Hid