topic ASA Configuration Question in Network Security

ASA Configuration Question

mingram27 — Mon, 11 Mar 2019 23:37:22 GMT

This may be an easy one for you guys, I just inherited an ASA from a purchased company. I have to assign a public IP to a host for externam access on a specific port.

Can anyone tell me what the specific syntax would be on a ASA? (Scenario below)

allow 65.x.x.x to host 172.x.x.x on port (non descript) 5711

I would really appreciate anyone's with this. The ASA is a 5520.

Thank you again.

ASA Configuration Question

Julio Carvajal — Wed, 01 Aug 2012 22:39:34 GMT

Hello Matthew,

Witch version are you running, lets say 8.3 or higher:

object network Outside_IP

host 65.2.2.2

object network Inside_IP

host 172.16.2.3

object service 5711

Service tcp source eq 5711

nat (inside,outside) source static Inside_IP Outside_IP service 5711 5711

access-list outside_in permit tcp any host 172.16.2.3 eq 5711

access-group outside_in in interface outside

ASA Configuration Question

mingram27 — Wed, 01 Aug 2012 23:18:02 GMT

Thank you very much JCarvaja. This will help a great deal!!!! Yes the version I am running i s8.3. Thanks again sir!