topic For some reason the config in Network Security

ON ASA 5506-X after reloading running configuration come back to default configuration .

amagisupport — Fri, 21 Feb 2020 14:12:23 GMT

Hi Experts

I have configured ASA 5506-X after configured saved as a startup configured and running configured as soon as i reloaded the device running configuration will go off , set back to default configuration ,, startup configured will be there . ?

Following steps already taken :

#configure factory-default

# sh ver | in register

set to 0x1

# copy running starting

# copy start run .

For some reason the config

Marvin Rhoads — Tue, 11 Jul 2017 09:08:47 GMT

For some reason the config-register setting is not being honored.

I would recommend capturing the output during reload via a console connection.

Connect to the console and start session logging and then reload. Look for any errors loading the startup-config during that process.

Thank you for support

amagisupport — Tue, 11 Jul 2017 10:22:21 GMT

Thank you for support

last day i had ran some command after that it has started working . i don't know after entered command and restarted its started working .

ciscoasa# fsck flash:

ERROR: There are one or more sw-modules running on the system. Please shut down the sw-modules before attempting to run fsck on flash:

fsck is the file system check

Marvin Rhoads — Tue, 11 Jul 2017 10:24:49 GMT

fsck is the file system check utility.

If running that fixed it, it could be that you had a corrupted file (potentially startup-config) that was causing the reload problem.

Any way final my issues has

amagisupport — Tue, 11 Jul 2017 10:29:23 GMT

Any way final my issues has been resolved , without my tension in fraction of second . thats a great .

Re: Any way final my issues has

prathamj26 — Wed, 29 Nov 2017 06:15:02 GMT

hi amagisupport,

what was the workaround to resolve the issue, because we are also facing same issue.

we are not able to reach directly connected ASA 5506 after reloading, configuration is showing proper but not able to ping and communication broken. where before reloading all communication and ping was happening...

can you please share me the workaround...it will help us to resolve the issue.