https://community.cisco.com/t5/network-security/fmc-tuning-for-15-site-asa-w-firepower-deployment/m-p/2917490#M415429 <P>Hi</P> <P>There is no specific recommendation I can think of. Wan speef from T1 to 20 Mbps should be enough for regular policy push and upgrades.</P> <P>Just make sure the FMC has good bandwidth available to it as its going to receive events from all the sensors at same time.</P> <P></P> Wed, 27 Apr 2016 19:46:18 GMT yogdhanu 2016-04-27T19:46:18Z https://community.cisco.com/t5/network-security/fmc-tuning-for-15-site-asa-w-firepower-deployment/m-p/2917489#M415428 <P>Are there any FMC tuning recommendations for managing a 15+ site ASA w/FirePOWER deployment connected to a centralized FMC via WAN &nbsp;speeds ranging from T1 (1.5Mbps) to 20 Mbps. There are no "issues" today&nbsp;but would like to get ahead of anything that may arise. &nbsp;Thanks</P> <P></P> Fri, 21 Feb 2020 13:48:14 GMT https://community.cisco.com/t5/network-security/fmc-tuning-for-15-site-asa-w-firepower-deployment/m-p/2917489#M415428 sdolnack 2020-02-21T13:48:14Z https://community.cisco.com/t5/network-security/fmc-tuning-for-15-site-asa-w-firepower-deployment/m-p/2917490#M415429 <P>Hi</P> <P>There is no specific recommendation I can think of. Wan speef from T1 to 20 Mbps should be enough for regular policy push and upgrades.</P> <P>Just make sure the FMC has good bandwidth available to it as its going to receive events from all the sensors at same time.</P> <P></P> Wed, 27 Apr 2016 19:46:18 GMT https://community.cisco.com/t5/network-security/fmc-tuning-for-15-site-asa-w-firepower-deployment/m-p/2917490#M415429 yogdhanu 2016-04-27T19:46:18Z