ASA 5585-x

peteryouhannafawzy — Fri, 21 Feb 2020 13:36:58 GMT

To enable VPN Clustering and Load Balancing in the ASA 5585-X ASA SSP-10 FP SSP-10 must to add the Security Plus license or any extra license .

Hi Peter,

Shivapramod M — Thu, 19 Nov 2015 13:11:06 GMT

Hi Peter,

I do not see any restriction in license for this configuration. VPN load balancing requires an active 3DES/AES license. The security appliance checks for the existence of this crypto license before enabling load balancing. So you may have to activate 3DES/AES license. Other than that It does not look like you need any extra license.

You can refer the below link for this. Please refer for the cluster configuration.

http://www.cisco.com/c/en/us/td/docs/security/asa/asa82/configuration/guide/config/vpnsysop.html#wp1048834

P.S. Please rate helpful posts.

Thanks,

Shivapramod M

topic Hi Peter, in Network Security

ASA 5585-x

Hi Peter,