topic Hi,If you want to check what in Network Security

ASA enable by default feature, command (hidden command), remove feature

Vui Han Lim — Fri, 21 Feb 2020 13:34:53 GMT

Hi All,

Team mate and I had assign to migrate a ASA from version 8.2.5 to 9.3.3;

We had upgrade/migrate the configuration as guide provide by cisco as below

http://www.cisco.com/c/en/us/td/docs/security/asa/asa93/upgrade/upgrade93.html

We had go through the new feature list

http://www.cisco.com/c/en/us/td/docs/security/asa/roadmap/asa_new_features.html

Now, my question are

1. Is there any document list down the feature is enable by default

2. What feature previous version is enable but latest version require to manually enable the feature (Example, ip xlate disable at version 8.2.5, but include in 9.0(1) version above; or ip xlate enable 8.2.5 by default, but in 9.3.3 require enable by manually )

checksh runn allit shows all

Tagir Temirgaliyev — Tue, 06 Oct 2015 13:38:36 GMT

check

sh runn all

it shows all hidden commands

Hi,If you want to check what

Ganesh Hariharan — Mon, 12 Oct 2015 05:32:57 GMT

Hi,

If you want to check what feature license are enabled , the you can check via show ver and show activation key which will display all licensing information along with what feature are there with boxes.

apart from that most of the configuration and commands are similar with iOS upgrades till 9.X what i have seen.

Hope it Helps..

-GI

Rate if it Helps..