https://community.cisco.com/t5/network-security/failover-setting-on-asa-with-csc-module/m-p/2710002#M415862 <P>On earlier versions of ASA software the licenses must also match to establish a healthy failover cluster. This limitation was removed in 8.3(1) and is documented in the <A href="http://www.cisco.com/c/en/us/td/docs/security/asa/asa83/release/notes/asarn83.html#28393">release notes for that version</A>.</P> Wed, 06 May 2015 20:06:02 GMT Marvin Rhoads 2015-05-06T20:06:02Z https://community.cisco.com/t5/network-security/failover-setting-on-asa-with-csc-module/m-p/2710001#M415861 <P>Hi.</P><P>&nbsp;</P><P>&nbsp;</P><P>We are having troubles with a CSC-20 module during &nbsp;failover implementation, we got &nbsp;the same hardware and versions, but user license are different the firs one&nbsp;is for 500 user, and the fail&nbsp;over has only 250 user available, is user licensing a cause for failover failure?</P><P>&nbsp;</P><P>&nbsp;</P><P>Fernando.</P><P>&nbsp;</P><P>&nbsp;</P><P>&nbsp;</P> Fri, 21 Feb 2020 13:28:09 GMT https://community.cisco.com/t5/network-security/failover-setting-on-asa-with-csc-module/m-p/2710001#M415861 fvargas 2020-02-21T13:28:09Z https://community.cisco.com/t5/network-security/failover-setting-on-asa-with-csc-module/m-p/2710002#M415862 <P>On earlier versions of ASA software the licenses must also match to establish a healthy failover cluster. This limitation was removed in 8.3(1) and is documented in the <A href="http://www.cisco.com/c/en/us/td/docs/security/asa/asa83/release/notes/asarn83.html#28393">release notes for that version</A>.</P> Wed, 06 May 2015 20:06:02 GMT https://community.cisco.com/t5/network-security/failover-setting-on-asa-with-csc-module/m-p/2710002#M415862 Marvin Rhoads 2015-05-06T20:06:02Z