topic Re:3 Node ASA active/passive Cluster possible ? in Network Security https://community.cisco.com/t5/network-security/3-node-asa-active-passive-cluster-possible/m-p/1973712#M416732 <HTML><HEAD></HEAD><BODY><P>For failover you cannot implement more than two ASAs as a cluster. Either for Active/Standby or Active/Active solutions </P><P></P><P>Tariq Bader</P><P></P><P>Sent from Cisco Technical Support Android App</P></BODY></HTML> Sat, 28 Jul 2012 15:50:28 GMT Tariq Bader 2012-07-28T15:50:28Z 3 Node ASA active/passive Cluster possible ? https://community.cisco.com/t5/network-security/3-node-asa-active-passive-cluster-possible/m-p/1973711#M416727 <P>Hi,</P><P></P><P> we operate an active/passive cluster with 2 ASA5510 in Routed Mode.</P><P></P><P> Is it possible to add another node, so that we have one active and two standby nodes in the cluster?</P><P></P><P> Unfortunately, I have found no documentation on this .... The data sheet say only up to 10 nodes can be mentioned as a VPN load balancing cluster.</P><P></P><P> best regards</P><P></P><P> Andreas</P> Fri, 21 Feb 2020 12:42:01 GMT https://community.cisco.com/t5/network-security/3-node-asa-active-passive-cluster-possible/m-p/1973711#M416727 krauss 2020-02-21T12:42:01Z Re:3 Node ASA active/passive Cluster possible ? https://community.cisco.com/t5/network-security/3-node-asa-active-passive-cluster-possible/m-p/1973712#M416732 <HTML><HEAD></HEAD><BODY><P>For failover you cannot implement more than two ASAs as a cluster. Either for Active/Standby or Active/Active solutions </P><P></P><P>Tariq Bader</P><P></P><P>Sent from Cisco Technical Support Android App</P></BODY></HTML> Sat, 28 Jul 2012 15:50:28 GMT https://community.cisco.com/t5/network-security/3-node-asa-active-passive-cluster-possible/m-p/1973712#M416732 Tariq Bader 2012-07-28T15:50:28Z