topic Save configuration in ASA 5505 in Network Security https://community.cisco.com/t5/network-security/save-configuration-in-asa-5505/m-p/1793105#M416997 <P>Hi all,&nbsp; I have this issue, I save the configuration in the ASA 5505 using write memory or using copy run start but whe i unplug the power cord and plug it back in the ASA gets its factory default configuration.... then what i do is a copy start run to get the configuration active....</P><P></P><P>why is this so? even though i saved the config to flash ... regards!</P> Fri, 21 Feb 2020 12:29:51 GMT adavila03 2020-02-21T12:29:51Z Save configuration in ASA 5505 https://community.cisco.com/t5/network-security/save-configuration-in-asa-5505/m-p/1793105#M416997 <P>Hi all,&nbsp; I have this issue, I save the configuration in the ASA 5505 using write memory or using copy run start but whe i unplug the power cord and plug it back in the ASA gets its factory default configuration.... then what i do is a copy start run to get the configuration active....</P><P></P><P>why is this so? even though i saved the config to flash ... regards!</P> Fri, 21 Feb 2020 12:29:51 GMT https://community.cisco.com/t5/network-security/save-configuration-in-asa-5505/m-p/1793105#M416997 adavila03 2020-02-21T12:29:51Z Save configuration in ASA 5505 https://community.cisco.com/t5/network-security/save-configuration-in-asa-5505/m-p/1793106#M416998 <HTML><HEAD></HEAD><BODY><P>You have incorrect boot register:</P><P>Please follow up the following document:</P><P><A class="jive-link-external-small" href="http://www.cisco.com/en/US/docs/security/asa/asa71/configuration/guide/trouble.html#wp1062992">http://www.cisco.com/en/US/docs/security/asa/asa71/configuration/guide/trouble.html#wp1062992</A></P><P>You need to set up default value 0x1 </P><P>___</P><P>HTH. Please rate this post if it was helpful. If this solves your problem, please mark this post as "Correct Answer"</P></BODY></HTML> Fri, 28 Oct 2011 08:49:03 GMT https://community.cisco.com/t5/network-security/save-configuration-in-asa-5505/m-p/1793106#M416998 Eugene Khabarov 2011-10-28T08:49:03Z Save configuration in ASA 5505 https://community.cisco.com/t5/network-security/save-configuration-in-asa-5505/m-p/1793107#M416999 <HTML><HEAD></HEAD><BODY><P>I never changed the config register. the default value was 0x41 . I switched it back to 0x1.</P><P></P><P>Thanks for your response!&nbsp; </P></BODY></HTML> Fri, 28 Oct 2011 14:07:37 GMT https://community.cisco.com/t5/network-security/save-configuration-in-asa-5505/m-p/1793107#M416999 adavila03 2011-10-28T14:07:37Z