topic Restoring ASA 5505 configuration in Network Security https://community.cisco.com/t5/network-security/restoring-asa-5505-configuration/m-p/1688418#M417169 <HTML><HEAD></HEAD><BODY><P>Hi Anish,</P><P></P><P>There are other option available other than copy paste of the config.</P><P></P><P>You can try the same with the info in the link below:</P><P><A class="jive-link-external-small" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008072142a.shtml">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008072142a.shtml</A></P><P></P><P>Hope this helps.</P><P></P><P>Regards,</P><P>Anisha</P><P></P><P>P.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.</P></BODY></HTML> Tue, 05 Jul 2011 03:01:34 GMT andamani 2011-07-05T03:01:34Z Restoring ASA 5505 configuration https://community.cisco.com/t5/network-security/restoring-asa-5505-configuration/m-p/1688417#M417167 <P>Hi,</P><P>I have got a working 5505 ruinning 8.3.1 firmware and 6.3.1 ASDM.</P><P></P><P>I have now purchased a second unit and ensured that both units are running the same firmware levels etc.</P><P></P><P>I have via the ASDM created a backup of the working units configuration, and now i want to load this configuration onto the second unit.</P><P></P><P>I have connected the consiole cable up to the second unit and tried pasting in the contents of the configuration file but no joy, any ideas at all.</P><P></P><P>I want to ensure that my configuration will work on this unit before i configure the two units in Active/Passiove configuration.</P><P></P><P>Many Thanks</P><P></P><P>Anish</P> Fri, 21 Feb 2020 12:23:40 GMT https://community.cisco.com/t5/network-security/restoring-asa-5505-configuration/m-p/1688417#M417167 snapfulfil001 2020-02-21T12:23:40Z Restoring ASA 5505 configuration https://community.cisco.com/t5/network-security/restoring-asa-5505-configuration/m-p/1688418#M417169 <HTML><HEAD></HEAD><BODY><P>Hi Anish,</P><P></P><P>There are other option available other than copy paste of the config.</P><P></P><P>You can try the same with the info in the link below:</P><P><A class="jive-link-external-small" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008072142a.shtml">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008072142a.shtml</A></P><P></P><P>Hope this helps.</P><P></P><P>Regards,</P><P>Anisha</P><P></P><P>P.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.</P></BODY></HTML> Tue, 05 Jul 2011 03:01:34 GMT https://community.cisco.com/t5/network-security/restoring-asa-5505-configuration/m-p/1688418#M417169 andamani 2011-07-05T03:01:34Z